Skip to product information
1 of 4

My Store

SparkFun MicroMod NRF52840 Processor

SparkFun MicroMod NRF52840 Processor

Regular price $12.25 USD
Regular price $15.00 USD Sale price $12.25 USD
Sale Sold out
Shipping calculated at checkout.
Quantity

Featuring the nRF52840 SoC from Nordic Semiconductor, the SparkFun MicroMod nRF52840 Processor offers a powerful combination of ARM Cortex-M4 CPU and 2.4 GHz Bluetooth transceiver in the MicroMod form-factor with the M.2 MicroMod connector to allow you to plug in a compatible

MicroMod Carrier Board

with any number of peripherals.

The MicroMod nRF52840 Processor features the same Raytac MDBT50Q-P1M found on our

Pro nRF52840 Mini

. This module includes an integrated trace antenna, fits the IC to an FCC-approved footprint along with including decoupling and timing mechanisms that would need to be designed into a circuit using the bare nRF52840 IC. The Bluetooth transceiver included on the nRF52840 boasts a BT 5.1 stack and supports Bluetooth 5, Bluetooth mesh, IEEE 802.15.4 (Zigbee & Thread) and 2.4Ghz RF wireless protocols (including Nordic's proprietary RF protocol) allowing you to pick which option works best for your application.

We've also routed two I2C buses, 2 SPI buses, eleven GPIO, dedicated digital, analog, PWM & PDM pins along with multiple serial UARTS to cover nearly all of your peripheral needs.

Get Started with the Micromod NRF52840 Processor Guide

Features

nRF52840 General Features:

  • ARM Cortex-M4 CPU with floating point unit (FPU)
    • 1MB internal Flash -- For all of your program, SoftDevice, and file-storage needs!
    • 256kB internal RAM -- For your stack and heap storage.
  • Integrated 2.4GHz radio with support for:
    • Bluetooth Low Energy (BLE) -- With peripheral and/or central BLE device support
    • Bluetooth 5 -- Mesh Bluetooth!
    • ANT -- If you want to turn the device into a heart-rate or exercise monitor.
    • Nordic's proprietary RF protocol -- If you want to communicate, securely, with other Nordic devices.
  • Every I/O peripheral you could need
    • USB -- Turn your nRF52840 into a USB mass-storage device, use a CDC (USB serial) interface, and more. This is a big add compared to the

      nRF52832

      !
    • UART -- Serial interfaces with support for hardware flow-control if desired.
    • I2C -- Everyone's favorite 2-wire bi-directional bus interface
    • SPI -- If you prefer the 3+-wire serial interface
    • Analog-to-digital converters (ADC) -- Eight pins on the nRF52840 Mini Breakout support analog inputs
    • PWM -- Timer support on any pin means PWM support for driving LEDs or servo motors.
    • Real-time clock (RTC) -- Keep close track of seconds and milliseconds, also supports timed deep-sleep features.

Specific Peripherals available on MicroMod nRF52840:

  • Three UARTs
    • Primary tied to USB interface. Two hardware UARTs.
  • Two I2C Buses
  • Two SPI Buses
    • Secondary SPI Bus primarily used for Flash IC
  • PDM Audio Processing
  • Two Analog Inputs
  • Two Dedicated Digital I/O Pins
  • Two Dedicated PWM Pins
  • Eleven General Purpose I/O Pins

Resources

MicroMod nRF52840 Processor Documentation:

  • Schematic

  • Eagle Files

  • Board Dimensions

  • Graphical Datasheet

  • Hookup Guide

  • Datasheet - MDBT50Q Module

  • Datasheet - nRF52840 IC

  • GitHub Hardware Repo

MicroMod Documentation:

  • Full MicroMod Range

  • SparkFun MicroMod Interface v1.0 - Pinout


  • SparkFun MicroMod Interface v1.0 - Pin Descriptions

  • Getting Started with MicroMod

  • Designing with MicroMod

  • MicroMod Info Page

  • MicroMod Forums

  • SparkFun Eagle Libraries

    (contains example footprints for the M.2 connector and SMD standoff)
  • M.2 MicroMod Connector Datasheet

  • MicroMod Reflowable Standoff Datasheet

View full details