{"product_id":"adafruit-1-47-320x172-round-rectangle-color-ips-tft-display-st7789","title":"Adafruit 1.47\" 320x172 Round Rectangle Color IPS TFT Display (ST7789)","description":"\u003cp\u003eDon't be such a \u003cem\u003esquare\u003c\/em\u003e - throw a curveball into your electronics with a curved-edge miniature display. Here's a new \"round rect\" TFT display - it's 1.47\" diagonal and has high-density 250 ppi, 172x320 full-color pixels with IPS any-angle viewing. We've seen displays of this caliber used in smartwatches and small electronic devices, but they've always been MIPI interface. Finally, we found one that is SPI and has a friendly display driver, so it works with any and all microcontrollers or microcomputers!\u003c\/p\u003e\n\u003cp\u003eThis lovely little display breakout is the best way to add a small, colorful, and very bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available! The 1.47\" display has 172x320 16-bit full color pixels and is an \u003cstrong\u003eIPS\u003c\/strong\u003e display, so the color looks great up to 80 degrees off-axis in any direction. The TFT driver (ST7789) is very similar to the popular ST7735, and our Arduino library supports it well.\u003c\/p\u003e\n\u003cp\u003eNote that the way we get the rounded corners is by \u003cem\u003edeleting\u003c\/em\u003e pixels. The corner pixels are still addressed in RAM, they just don't appear, so it isn't like you have to do some special radial-pixel mapping. Treat it like a rectangular display.\u003c\/p\u003e\n\u003cp\u003eOur breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as an ultra-low-dropout 3.3V regulator and a 3\/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little space so we placed a microSD card holder so you can easily load full color bitmaps from a FAT16\/FAT32 formatted microSD card. The microSD card is not included, but you can pick one up here.\u003c\/p\u003e\n\u003cp\u003eOf course, we wouldn't just leave you with a datasheet and a \"good luck!\" - \u003c\/p\u003e\u003cp\u003ewe've written a full open-source graphics library that can draw pixels, lines, rectangles, circles, text, and bitmaps as well as example code and a wiring tutorial\u003c\/p\u003e. The code is written for Arduino but can be easily ported to your favorite microcontroller!\n\u003cp\u003eThis display breakout also features an 18-pin \"EYESPI\" standard FPC connector with a flip-top connector. You can use an 18-pin 0.5mm pitch FPC cable to connect to all the GPIO pins, for when you want to skip the soldering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note! \u003c\/strong\u003eThis display is designed original for smartwatches and similar, where there's a glass over the screen. Without something gently holding the screen down, the backlight can eventually peel away from the TFT. (It's not destructive but it's unattractive) You can prevent this by, ideally, adding a plastic or glass cover\/overlay. If using bare, try dabbing a touch of E6000 or similar craft glue on the thin side edges, or using a thin piece of tape to keep the front TFT attached to the backlight.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1.47\" LCD TFT display\u003c\/li\u003e\n\u003cli\u003eBuilt-in microSD slot \u003c\/li\u003e\n\u003cli\u003e1x11 header for easy breadboarding\u003c\/li\u003e\n\u003cli\u003e4 x 0.1\" \/ 2.5mm mounting holes in corners\u003c\/li\u003e\n\u003cli\u003eTFT screen dimensions: 34mm x 19.4mm\u003c\/li\u003e\n\u003cli\u003eOverall dimension:  37mm x 30.5mm\u003c\/li\u003e\n\u003cli\u003eMounting holes: 1.2\" x 1.0\"\"\u003c\/li\u003e\n\u003cli\u003eProduct Dimensions: 37.3mm x 30.5mm x 5.4mm\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 6.7g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eEYE SPI 18-pin FPC Connector:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eVIN (3 to 5V DC power)\u003c\/li\u003e\n\u003cli\u003eBacklight (3~5V logic PWM optional input)\u003c\/li\u003e\n\u003cli\u003eGround\u003c\/li\u003e\n\u003cli\u003eSPI Clock (3~5V logic in)\u003c\/li\u003e\n\u003cli\u003eSPI MOSI (3~5V logic Microcontroller Out, Screen\/SD In)\u003c\/li\u003e\n\u003cli\u003eSPI MISO (3~5V logic Microcontroller In, Screen\/SD Out)\u003c\/li\u003e\n\u003cli\u003eTFT Data\/Command (3~5V logic in)\u003c\/li\u003e\n\u003cli\u003eTFT Reset (optional 3~5V logic in)\u003c\/li\u003e\n\u003cli\u003eTFT SPI Chip Select (3~5V logic in)\u003c\/li\u003e\n\u003cli\u003eSD Card SPI Chip Select (3~5V logic in)\u003c\/li\u003e\n\u003cli\u003eUnused\u003c\/li\u003e\n\u003cli\u003eUnused\u003c\/li\u003e\n\u003cli\u003eUnused\u003c\/li\u003e\n\u003cli\u003eUnused\u003c\/li\u003e\n\u003cli\u003eUnused\u003c\/li\u003e\n\u003cli\u003eUnused\u003c\/li\u003e\n\u003cli\u003eUnused\u003c\/li\u003e\n\u003cli\u003eUnused\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eProduct Wiki\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006256976027,"sku":"DGHLC 7166736924867","price":9.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/adafruit-1-47-320x172-round-rectangle-color-ips-tft-display-st7789-adafruit-ada5393-41056040124611_421526a1-c5bc-4be1-ade0-3b4949310866.jpg?v=1793487198","url":"https:\/\/thepihutshops.com\/products\/adafruit-1-47-320x172-round-rectangle-color-ips-tft-display-st7789","provider":"The Pi Hut","version":"1.0","type":"link"}