{"title":"Cooling","description":null,"products":[{"product_id":"paramount-2-raspberry-pi-4-fan-case","title":"Paramount 2 - Raspberry Pi 4 Fan Case","description":"\u003cp\u003e\u003cspan\u003eFunction melds into elegant art with this premium \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eRaspberry Pi\u003c\/p\u003e case from \u003cp\u003eC4 Labs\u003c\/p\u003e. \u003cspan\u003eInspired by the Art Deco Mid Century styles, this premier case converts your Raspberry Pi into an eye-catching piece of art.\u003c\/span\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNow available in either wood or clear\u003c\/strong\u003e! (\u003cstrong\u003eselect above\u003c\/strong\u003e)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhether you're running a server, Pi-Hole or any other 'static' project, this case gives will make your project a focal point in any room. It'll keep it cool too, thanks to the \u003cstrong\u003eincluded\u003c\/strong\u003e 50mm fan and heatsinks, which sucks cool air into the case and removes heat from your Raspberry Pi.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe top cover lifts off to reveal the Pi inside for quick and easy access, with side wings engraved on each side of the case. The case is compatible with both the Raspberry Pi 4 \u003cstrong\u003eand\u003c\/strong\u003e 3.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis case comes in clear or wood combined with modern materials and stainless steel fixings, giving an alternative\/modern vintage look!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eArt Deco inspired design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIncludes 50mm fan and heat sink set for superior airflow and cooling\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMade to fit the Raspberry Pi 3 and Raspberry Pi 4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTop cover lifts off for easy access\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eStainless steel hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003eAssembly guide - \u003c\/span\u003e\u003cp\u003ePage 1\u003c\/p\u003e and \u003cp\u003ePage 2\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Info\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight - 13oz\u003c\/li\u003e\n\u003cli\u003eDimensions - \u003cspan\u003e5.6 × 2.77 × 5.5 in\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Wood","offer_id":50006710780059,"sku":"DGHLC 4745700507710","price":16.33,"currency_code":"USD","in_stock":true},{"title":"Clear","offer_id":50006710812827,"sku":"DGHLC 4745700507710-2","price":16.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/paramount-2-raspberry-pi-4-fan-case-c4-labs-103265-16439160111166_54e001f4-9af2-4e63-89ac-02ea7905516a.jpg?v=1793495871"},{"product_id":"low-profile-ice-tower-raspberry-pi-4-cooler","title":"Low-Profile ICE Tower Raspberry Pi 4 Cooler","description":"\u003cp\u003eA \u003cstrong\u003elow-profile\u003c\/strong\u003e version of our epic \u003c\/p\u003e\u003cp\u003eICE-Tower cooler\u003c\/p\u003e - bringing desktop PC level cooling to the Raspberry Pi world!\n\u003cp\u003eJust like an aftermarket cooler for a full-size desktop PC, the ICE tower uses a central 5mm copper heatpipe to quickly conduct heat away from the Raspberry Pi CPU. Heat moves up into the heat pipes, allowing the included 7-blade LED fan to blow cool, crisp air over the fins and the Raspberry Pi itself, bringing temperatures down lower than any of our other cooling solutions can provide.\u003c\/p\u003e\n\u003cp\u003eThe fan itself is powered via your Raspberry Pi GPIO (5V and GND pins) meaning no additional external power supply is required, and the built-in LED cycles through different colours as it spins.\u003c\/p\u003e\n\u003cp\u003eNot only is the ICE-Tower a fantastic cooler, but it also comes with the hardware and spares you need to swap this out with your other Raspberry Pis.\u003c\/p\u003e\n\u003cp\u003eIf you prefer, a thermal compound can also be used in place of the thermal pad. Experiment with your favourite PC thermal compound and bring those temperatures down even further!\u003c\/p\u003e\n\u003cp\u003eThe low-profile ICE-Tower really is the ultimate premium cooling solution for the Raspberry Pi.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Images may not reflect the kit received as we are now shipping the updated V2 version which has a slightly different bracket design and fixings. Overall functionality is the same.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eMatching metal Raspberry Pi 4 case now available!\u003c\/p\u003e \n\u003ch2\u003eCompatible Metal Case!\u003c\/h2\u003e\n\u003cp\u003eThe current version (V2) of this cooler that we are shipping is compatible with the \u003c\/p\u003e\u003cp\u003eV2 Metal Case for the Low-profile ICE Tower available here\u003c\/p\u003e.\u003cbr\u003e\n\u003ch2\u003eAlternative ICE Towers!\u003c\/h2\u003e\n\u003cp\u003eWe also stock the original \u003c\/p\u003e\u003cp\u003eICE Tower\u003c\/p\u003e with RGB LED fan, and an \u003cp\u003ealternative Type-B Low-profile ICE Tower\u003c\/p\u003e which blows air away from the board.\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDC 5V Power in (Can be powered by the Raspberry Pi)\u003c\/li\u003e\n\u003cli\u003eLow-profile\u003c\/li\u003e\n\u003cli\u003eIce Tower Structure\u003c\/li\u003e\n\u003cli\u003e5mm copper tube\u003c\/li\u003e\n\u003cli\u003eSuper heat dissipation\u003c\/li\u003e\n\u003cli\u003eRated power 0.4W @5V, 0.08A\u003c\/li\u003e\n\u003cli\u003eFan LED lights (cycles different colours)\u003c\/li\u003e\n\u003cli\u003eEasy to setup\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 3B+\/4B\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006711173275,"sku":"DGHLC 4598901014590","price":11.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/low-profile-ice-tower-raspberry-pi-4-cooler-52pi-ep-0112-30583494770883_6c4ee086-5e77-429d-935c-bd44bf2f4d66.jpg?v=1793495876"},{"product_id":"smart-fan-hat-for-raspberry-pi-v4-0","title":"Smart Fan HAT For Raspberry Pi V4.0","description":"\u003cp\u003eThe Smart Fan HAT is an inexpensive cooling solution for your \u003c\/p\u003e\u003cp\u003eRaspberry Pi 4\u003c\/p\u003e with a \u003cstrong\u003e40mm fan\u003c\/strong\u003e and its own \u003cstrong\u003e32-bit processor\u003c\/strong\u003e for smart cooling.\n\u003cp\u003eThe 32-bit processor receives commands from Raspberry Pi via the I2C interface. A \u003cstrong\u003estep-up power supply\u003c\/strong\u003e converts the 5V provided by Raspberry Pi to 12V, ensuring precise speed control. Using pulse width modulation, it powers the fan just enough to maintain a constant temperature of the Raspberry Pi processor.\u003c\/p\u003e\n\u003cp\u003eThe Smart Fan preserves all the GPIO pins, allowing any number of HATs to be stacked on top of Raspberry Pi. If another add-on card has to dissipate power, a secondary Smart Fan can be added to the stack.\u003c\/p\u003e\n\u003cp\u003eTwo Smart Fans can be installed on top of each Raspberry Pi. The assumption is that you have one more card in the stack which requires cooling. The bottom side of the Smart Fan has a jumper which needs to be installed on the second fan, in order for the Raspberry Pi to differentiate the two I2C addresses.\u003c\/p\u003e\n\n\u003ch2\u003eSoftware Control\u003c\/h2\u003e\n\u003cp\u003eThe Smart Fan can be controlled from any program using simple\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\u003cp title=\"Command Line for Smart Fan\"\u003ecommand line\u003c\/p\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cp title=\"Python Library for Smart Fan\"\u003ePython\u003c\/p\u003e\u003cspan\u003e \u003c\/span\u003efunctions. A \u003cp title=\"Smart Fan HAT Node-RED driver\"\u003eNode-Red interface\u003c\/p\u003e\u003cspan\u003e \u003c\/span\u003elets you set and monitor the temperature from the browser. The software can maintain the temperature history in a log file which can be plotted in Excel, an example loop can be found\u003cspan\u003e \u003c\/span\u003e\u003cp title=\"Ehample Loop for Smart Fan\"\u003ehere\u003c\/p\u003e. \n\u003ch3\u003eControlling the Fan Speed\u003c\/h3\u003e\n\u003cp\u003eSince the Smart Fan is a slave to the I2C interface, Raspberry Pi must tell it what to do.\u003c\/p\u003e\n\u003cp\u003eCommand line and Python functions are available to control the fan speed. Raspberry Pi needs to monitor the processor temperature and control the fan speed accordingly. A PID loop sample program can be downloaded from GitHub. In case of malfunction, if the temperature exceeds a safe limit, Raspberry Pi must shut itself off to prevent burnout.\u003c\/p\u003e\n\u003ch3\u003eSelf-test\u003c\/h3\u003e\n\u003cp\u003eThe Smart Fan has a LED controlled by the local processor. At power up, the processor powers up the fan for 1 second, so the user can make sure the system is functional.\u003c\/p\u003e\n\u003cp\u003eThe onboard LED shows the status of the fan. When the fan is off, the LED blinks 1 time per second. When the fan is turned on, the LED blinks between 2 to 10 times per second, proportional to the speed of the fan.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e40x40x10mm fan with 6 CFM airflow\u003c\/li\u003e\n\u003cli\u003eStep-up 12V power supply for precise fan speed control\u003c\/li\u003e\n\u003cli\u003ePWM Controller modulates the fan to keep a constant temperature\u003c\/li\u003e\n\u003cli\u003eDraws less than 100mA of power\u003c\/li\u003e\n\u003cli\u003eStackable to itself, 2 fans can be added to Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eFully stackable allows adding other cards to Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eUses only I2C interface, leaves full use of all GPIO pins\u003c\/li\u003e\n\u003cli\u003eSuper quiet and efficient\u003c\/li\u003e\n\u003cli\u003eSmart Fan Raspberry Pi\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eCommand Line Interface\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePython Library\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePython Example\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eNode-RED node\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp title=\"Smart FAN User's Guide\"\u003eUser's Guide\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp title=\"Smart FAN Schematics\"\u003eOpen Source Hardware Schematic V2\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp title=\"Smart Fan V4 Schematic\"\u003eOpen Source Hardware Schematic V4\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp title=\"Smart Fan Schemativ V5\"\u003eOpen Source Hardware Schematic V5\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp title=\"Smart FAN 2D Drawing\"\u003e2D CAD Drawing\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp title=\"Smart Fan 3D Step Model\"\u003e3D STEP Model\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp title=\"Command Line for Smart Fan\"\u003eCommand line\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp title=\"Python Library for Smart Fan\"\u003ePython Libraries\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp title=\"Smart Fan HAT Node-RED driver\"\u003eNode-RED Nodes\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp title=\"RoHS and REACH Compliance Declaration\"\u003eRoHS and REACH Compliance Declaration\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Smart Fan HAT board\u003c\/li\u003e\n\u003cli\u003e1x 40mm fan\u003c\/li\u003e\n\u003cli\u003eMounting hardware and fixings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eRevision History\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of 15\/12\/2023\u003c\/strong\u003e - We are now stocking an updated version, which﻿ includes some board changes and a much shorter tidier fan wire\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006728278171,"sku":"DGHLC 7561773416643","price":13.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/smart-fan-hat-for-raspberry-pi-v4-0-sequent-103832-41307392803011_43a12fa5-de1a-4297-91c8-004094aecebc.jpg?v=1793495883"},{"product_id":"argon-thrml-60mm-radiator-cooler-for-raspberry-pi-5","title":"Argon THRML 60mm Radiator Cooler For Raspberry Pi 5","description":"\u003cp\u003eThe \u003c\/p\u003e\u003cp\u003eArgon\u003c\/p\u003e THRML 60mm Radiator Cooler offers the\u003cem\u003e very best\u003c\/em\u003e in extreme cooling performance for your \u003cp\u003eRaspberry Pi 5\u003c\/p\u003e.\n\u003cp\u003eConstructed with copper heat pipes to draw heat away from the board, and a large 60mm PWM fan to cool the radiator fins, this Raspberry Pi 5 cooling solution is hard to beat.\u003c\/p\u003e\n\u003cp\u003eThe cooler attaches to the Raspberry Pi 5 fan mounting points using push pins for easy assembly. Thermal compound and a thermal pad are included to ensure optimal heat transfer from the CPU. The 60mm fan uses the dedicated Raspberry Pi 5 fan header, keeping your GPIO pins free for your project.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable in black or silver\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- select an option above before adding to your cart.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eWe also offer the Argon THRML 30mm active cooler\u003c\/p\u003e if you're looking for something more compact.\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eSignificantly boosts thermal management on Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eSuperior heat dissipation with copper heat pipes and a tower-style radiator\u003c\/li\u003e\n\u003cli\u003eIntegrated 60mm PWM fan helps cool down your Raspberry Pi 5 faster\u003c\/li\u003e\n\u003cli\u003eQuick snap-on and push pins for easy mounting on Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eComes with thermal compound and thermal pad for better heat management\u003c\/li\u003e\n\u003cli\u003eComes in black or silver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInput voltage: 5V DC supplied via 4-pin fan header on Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eFan speed control: Pulse width modulation control with tachometer\u003c\/li\u003e\n\u003cli\u003eMaximum airflow: 18.13 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum fan speed: 5000 RPM +\/- 15%\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eComing soon\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cem\u003eTBC\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Black","offer_id":50006746759323,"sku":"DGHLC 7703512318147","price":11.03,"currency_code":"USD","in_stock":true},{"title":"Silver","offer_id":50006746792091,"sku":"DGHLC 7703512318147-2","price":11.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/argon-thrml-60mm-radiator-cooler-for-raspberry-pi-5-argon40-105850-41416786477251_d3c61103-d680-4d81-9813-e0d0080a1fa8.jpg?v=1793495897"},{"product_id":"bel-aire-ac-case-for-raspberry-pi","title":"Bel Aire AC Case For Raspberry Pi","description":"\u003cp\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eC4Labs\u003c\/p\u003e have upgraded the original Bel-Aire case with a muscle-car style air intake scoop - enter the Bel-Aire AC! \u003cp\u003e\u003cspan\u003eThis unique hot-rod design case turns a humble \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eRaspberry Pi\u003c\/p\u003e into a high-octane centrepiece worth displaying prominently. \u003cspan\u003eThe new air intake scoop comes with a 40mm 5v fan but also allows enough room for other 40mm fans such as the popular Noctua fan (not included).\u003c\/span\u003e \u003cp\u003e\u003cspan\u003eThis updated Bel-Aire still offers the unique two-tone laser engraving style and \"living hinge\" folding case design of the original whilst adding compatibility for the Raspberry Pi 4B (not included) for even more power under the hood.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eSo what are you waiting for? Take this luxurious dreamboat out for a spin today!\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003cspan\u003eFits most 40mm fans (standard fan included)\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eUnique two-tone laser engraving\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eGPIO cable pass-through and access to ports\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eWeight: 3oz\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eDimensions: 4.5 × 3.75 × 3 (inches)\u003c\/span\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eCompatability\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003cspan\u003eRaspberry Pi 4\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eRaspberry Pi 3B+ \/ 3\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eRaspberry Pi 2\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eRaspberry Pi B+\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eAsus Tinker Board\u003c\/span\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eAssembly Guide\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003cp\u003e\u003cspan\u003eAvailable here (image)\u003c\/span\u003e\u003c\/p\u003e\u003c\/li\u003e \u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006746824859,"sku":"DGHLC 6077871849667","price":10.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/bel-aire-ac-case-for-raspberry-pi-c4-labs-103376-22727382761667_b1a68b65-9399-4974-aba3-b37d35fb1955.jpg?v=1793495906"},{"product_id":"argon-one-m-2-raspberry-pi-4-case","title":"Argon ONE M.2 Raspberry Pi 4 Case","description":"\u003cp\u003eThe \u003cstrong\u003eArgon ONE M.2\u003c\/strong\u003e Case for the \u003c\/p\u003e\u003cp\u003eRaspberry Pi 4\u003c\/p\u003e builds on the popular \u003cp\u003eArgon ONE\u003c\/p\u003e case and provides two full-sized HDMI ports, Power Management Modes that allow for automatic booting, Built-in IR support and integrated \u003cp\u003eM.2 SATA SSD\u003c\/p\u003e support through the USB 3 Ports of the Raspberry Pi 4!\n\u003ch3\u003eBoot from M.2 SSDs!\u003c\/h3\u003e\n\u003cp\u003eThe case provides extended support for \u003c\/p\u003e\u003cp\u003eM.2 SATA SSDs\u003c\/p\u003e (\u003cspan\u003eKey-B and Key B\u0026amp;M)\u003c\/span\u003e allowing you to maximize the true potential speeds of your Raspberry Pi 4.\n\u003cp\u003eYou will now be able to boot via an M.2 SATA SSD for faster boot times and larger storage capacity compared to the traditional microSD cards!\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eUASP Support\u003c\/h3\u003e\n\u003cp\u003eArgon ONE M.2 is UASP Supported for the Raspberry Pi 4 which means you can maximize the transfer speeds of your M.2 SATA Drive.\u003c\/p\u003e\n\u003ch3\u003eFull-sized HDMI ports\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eImproves the dual-monitor support of the Raspberry Pi 4 video input\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePower Management Modes\u003c\/h3\u003e\n\u003cp\u003eThe case offers two power management options: Automatic booting or Always-on mode\u003c\/p\u003e\n\u003ch3\u003eActive \u0026amp; Passive Cooling\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eSoftware Programmable internal 30mm fan \u003c\/span\u003e\u003cspan\u003evia the Argon ONE software. Aluminium alloy top case acts as a giant heatsink connected to the CPU of the Raspberry Pi 4.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eBuilt-in IR Support\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eProgrammable IR support to the Raspberry Pi with streamlined options. Will work out of the box with the upcoming Argon ONE Remote, and with NEC-compliant remote support (software update pending).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eCable Management\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eRepositioned all ports to the back of the Raspberry Pi 4 for clean cable management, adding to the case's sleek and modern design\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatability\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with the \u003cp\u003eRaspberry Pi 4\u003c\/p\u003e only\u003c\/li\u003e\n\u003cli\u003eCompatible with any M.2 SATA SSD with Key-B and Key B\u0026amp;M\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eProduct Manual\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006746923163,"sku":"DGHLC 4741870157886","price":23.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/argon-one-m-2-raspberry-pi-4-case-argon40-arg-005-16399212642366_7d90b3bc-7b24-402d-800e-6c40c0d2da2a.jpg?v=1793495913"},{"product_id":"high-performance-cooler-with-pwm-fan-for-raspberry-pi-4","title":"High Performance Cooler With PWM Fan For Raspberry Pi 4","description":"\u003cp\u003eThis is a compact high-performance cooler designed for the \u003c\/p\u003e\u003cp\u003eRaspberry Pi 4\u003c\/p\u003e. The cooler comes with a 30mm PWM fan and has fins made of aluminium. The smaller form factor with just 43mm height makes the cooler compatible with the \u003cp\u003eKKSB Raspberry Pi 4 Tall Case\u003c\/p\u003e.\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eUser guide available here\u003c\/p\u003e!\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and case not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat makes it different from other Raspberry Pi coolers?\u003c\/h2\u003e\n\u003cp\u003eThe KKSB Raspberry Pi 4 High-Performance Cooler apparently looks similar to other Raspberry Pi coolers in the market. However, it has the following distinct features that make the KKSB Cooler more effective than most of the coolers available in the market:\u003c\/p\u003e\n\u003ch3\u003eFlat aluminium base for perfect CPU contact\u003c\/h3\u003e\n\u003cp\u003eThe flat aluminium base makes perfect contact with the CPU. Most Raspberry Pi coolers in the market have pressed heat pipes without CNC-machine treatment. This is why their contact area remains uneven. The heat pipe of the KKSB Cooler is pressed along the block such that the interface along the CPU remains flat.\u003c\/p\u003e\n\u003ch3\u003eQuiet in all modes\u003c\/h3\u003e\n\u003cp\u003eThe KKSB PWM Fan on this high-performance cooler produces minimum noise even at maximum mode. In addition, it only operates when the temperature is above the configured limit so it stays off during normal workloads.\u003c\/p\u003e\n\u003ch3\u003eNickel Plating\u003c\/h3\u003e\n\u003cp\u003eThe KKSB High-Performance Cooler Unit is nickel plated.\u003c\/p\u003e\n\u003ch3\u003eSoldering between Thermal Pipe and Heatsink\u003c\/h3\u003e\n\u003cp\u003eMost Raspberry Pi coolers in the market have no soldering between the thermal pipes and heatsinks. The soldering between the heatsink and pipe of this KKSB Cooler optimises heat transfer through better contact.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eCompact Size\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe height of the KKSB High-Performance Cooler is just 43mm. This means that you can also use this cooler inside the KKSB Raspberry Pi 4 Tall Case. The height of the cooler is lower than many other Raspberry Pi cooling towers in the market.\u003c\/p\u003e\n\u003ch2\u003eFan Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFan Impeller: 7 Blades - BLACK PBT (UL94V-0)\u003c\/li\u003e\n\u003cli\u003eFan Frame Material: Reinforced Glass Fiber - BLACK PBT (UL94V-0)\u003c\/li\u003e\n\u003cli\u003eBearing System: Sealed Sleeve Bearing (SSB)\u003c\/li\u003e\n\u003cli\u003eRated Voltage: 5V DC\u003c\/li\u003e\n\u003cli\u003eOperating Voltage: 4.5V ~ 5.5V DC\u003c\/li\u003e\n\u003cli\u003eStart-Up Voltage: 3.5V DC\u003c\/li\u003e\n\u003cli\u003eRated Current: 0.04 Amp (Max: 0.06 Amp) | Testing Conditions: 25oC \/ 65% Relative Humidity\u003c\/li\u003e\n\u003cli\u003eLabelled Current: 0.06 Amp\u003c\/li\u003e\n\u003cli\u003eRated Power: 0.20 Watt (Max: 0.30 Watt) | Testing Conditions: 25oC \/ 65% Relative Humidity\u003c\/li\u003e\n\u003cli\u003eRated Speed: 5000 ± 900 Rotation Per Minute (RPM) | Testing Conditions: 25oC \/ 65% Relative Humidity\u003c\/li\u003e\n\u003cli\u003eAir Flow (Cubic Feet per Minute): 1.58 CFM (Min: 1.30 CFM)\u003c\/li\u003e\n\u003cli\u003eAir Pressure: 0.98 mmAq (Min: 0.66 mmAq)\u003c\/li\u003e\n\u003cli\u003eControl Interface: PWM\u003c\/li\u003e\n\u003cli\u003eColoured Wires: Red (+), Blue (PWM), and Black (-) (UL1061\/28AWGx 100mm)\u003c\/li\u003e\n\u003cli\u003eCompliance: RoHS\u003c\/li\u003e\n\u003cli\u003eSafety Approval: CE, UL, CUL, TUV\u003c\/li\u003e\n\u003cli\u003eLife Expectancy: Up to 30,000 Hours\u003c\/li\u003e\n\u003cli\u003eWeight (PWM Fan): 4.9 Grams\u003c\/li\u003e\n\u003cli\u003eWires Length (Exposed out of the fan): Approximately 100mm (+\/- 5mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAssembly Instructions\u003c\/h2\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eView the full PDF user guide here\u003c\/p\u003e.\n\u003cp\u003eUse the product images along with the points below to align and fit your cooler correctly:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse Clips with the cooling tower to attach the KKSB PWM Fan\u003c\/li\u003e\n\u003cli\u003eAlign the brackets of the tower with the Raspberry Pi 4 screw holes such that the PWM fan is facing opposite the Raspberry Pi 4 GPIO\u003c\/li\u003e\n\u003cli\u003eSecure the tower using screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eConnection Example with Raspberry Pi 4 GPIO\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe 30mm 5V PWM Fan has 3x wires. Please connect each wire carefully to the right GPIO pin as shown below.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eRed Wire (5V) corresponds to the GPIO \u003cstrong\u003ePin 4\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBlack Wire (Ground) corresponds to the GPIO \u003cstrong\u003ePin 6\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBlue Wire (GPIO 14 TXD) corresponds to the GPIO \u003cstrong\u003ePin 8\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/kksb-fan-pins_1.jpg?v=1674742203\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003ePackage Contents\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1x KKSB Cooling Tower\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBrackets and fasteners\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1x KKSB 30mm PWM Fan\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and case not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006749446299,"sku":"DGHLC 7517673816259","price":9.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/high-performance-cooler-with-pwm-fan-for-raspberry-pi-4-kksb-105277-40109840793795_9247dd14-7296-4b65-8cd8-1f164d339efc.jpg?v=1793495921"},{"product_id":"zebra-virtue-fan-case-wood-mist","title":"Zebra Virtue Fan Case - Wood Mist","description":"\u003cp\u003eThe Virtue Fan case is a unique Raspberry Pi case design from our friends at \u003c\/p\u003e\u003cp\u003eC4Labs\u003c\/p\u003e in the USA, which \u003cstrong\u003eincludes a 40mm fan, heatsinks and rubber feet\u003c\/strong\u003e!\n\u003cp\u003eThis version is '\u003cem\u003eWood Mist\u003c\/em\u003e' - a stunning cocktail of a wood layer sitting below a misted clear layer, combined with awesome custom-etched graphics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe case comes with additional parts which make it compatible with both the \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRaspberry Pi 4\u003c\/strong\u003e\u003c\/p\u003e\u003cstrong\u003e and 3.\u003c\/strong\u003e\n\u003cp\u003eUnder the top misted layer is a 40mm 5V fan which connects directly to the Raspberry Pi GPIO which, along with the included heatsinks, keeps your powerhouse of a mini-computer cool. \u003cspan\u003eThere is also a pass-through section for the GPIO cable and camera ribbon cables, as well as mounting holes on the underside for convenient mounting.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe signature C4Labs low-profile nuts finish the design perfectly, keeping the overall dimensions as small as possible. Rubber feet are included to keep the case steady.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated fan\u003c\/li\u003e\n\u003cli\u003ePass-through for the GPIO and camera ribbon cables\u003c\/li\u003e\n\u003cli\u003eStainless steel hardware\u003c\/li\u003e\n\u003cli\u003eHeatsinks and rubber feet included\u003c\/li\u003e\n\u003cli\u003eUnderside mounting holes\u003c\/li\u003e\n\u003cli\u003eWeight: 5.5oz\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe following instruction images are also included in the box:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003ePart 1\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePart 2\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006784639131,"sku":"DGHLC 4746652057662","price":13.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/zebra-virtue-fan-case-wood-mist-c4-labs-103266-16450879586366_76c540d1-76b1-4da4-bf4e-70d385c7d4a6.jpg?v=1793495926"},{"product_id":"pi-box-pro-4-case-no-sd-access","title":"Pi-Box Pro 4 Case (No SD Access)","description":"\u003cp\u003eThe Pi-Box Pro 4 is a rugged industrial aluminium* enclosure kit for the Raspberry Pi 4. If you need a tough enclosure for your application, look no further!\u003c\/p\u003e\n\u003cp\u003eBy utilising a micro-HDMI Pi4 extender board, the power and micro HDMI are located at the rear of the case alongside the Ethernet and USB connectors.\u003c\/p\u003e\n\u003cp\u003eThe rear panel is made from 3mm acrylic and allows for communication via Bluetooth and Wi-Fi signals from the Pi4.\u003c\/p\u003e\n\u003cp\u003eA heatsink kit is included in the kit. It consists of 2 aluminium blocks which transfer the heat from the processor and RAM to the aluminium carrier plate, then out to the enclosure, making the entire assembly a heat sink. Thermal adhesive pads are included for this assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis version blocks access to the SD card\u003c\/strong\u003e to stop unwanted SD removal\/swapping\/theft. \u003c\/p\u003e\u003cp\u003eWe also stock an alternative version which has a slot to access the SD card.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: \u003cspan\u003eAssembly required\u003c\/span\u003e. Requires a Phillips and Torx bit\/screwdriver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eResources\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eAssembly Guide\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Aluminium body with a single acrylic side panel to allow WiFi\/Bluetooth signals\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006832021659,"sku":"DGHLC 4723729498174","price":22.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/pi-box-pro-4-case-no-sd-access-lincoln-binns-103070-16258349891646_e06b1e4e-0287-4f05-9e4f-1eca8c58dc0b.jpg?v=1793495932"},{"product_id":"metal-case-with-40mm-cooling-fan-for-raspberry-pi-5","title":"Metal Case With 40mm Cooling Fan For Raspberry Pi 5","description":"\u003cp\u003e\u003cspan\u003eThis strong metal case is a practical solution for protecting and cooling your \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eRaspberry Pi 5\u003c\/p\u003e.\n\u003cp\u003e\u003cspan\u003eThe case includes a \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e4010 cooling fan\u003c\/p\u003e and copper heatsinks to ensure efficient heat management. The fan has a 4-pin JST connector for using with the Raspberry Pi 5 fan header, keeping your GPIO pins free for your project. Its adjustable speed feature allows for customisable cooling based on your usage needs.\n\u003cp\u003e\u003cspan\u003eThis case is a reliable option for safeguarding and cooling your Raspberry Pi 5 while maintaining its performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eRaspberry Pi 5\u003c\/p\u003e is \u003cstrong\u003eNOT\u003c\/strong\u003e included\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCompatible with Raspberry Pi 5\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIncluded fan with JST connector for the Pi 5 fan header\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEasy to assemble\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTough metal case\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCopper heat sinks\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdjustable speed fan\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 210g\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: H: 40mm x L: 92mm x W: 66m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eProduct Wiki\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Metal Case for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x Adjustable Speed Fan with JST header\u003c\/li\u003e\n\u003cli\u003e4x M2.5 Nuts \u003c\/li\u003e\n\u003cli\u003e4x M2.5 Ball Head Screws\u003c\/li\u003e\n\u003cli\u003e4x Copper Pillar\u003c\/li\u003e\n\u003cli\u003e4x Hand Tightened Copper Nut\u003c\/li\u003e\n\u003cli\u003e8x M2.5 Screws for Case\u003c\/li\u003e\n\u003cli\u003e1x M2.5 Screw Driver\u003c\/li\u003e\n\u003cli\u003e4x Transparent Anti-Slip Rubber Feet\u003c\/li\u003e\n\u003cli\u003e4x Copper Heat Sinks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006856007835,"sku":"DGHLC 7693892845763","price":10.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/metal-case-for-raspberry-pi-5-with-4010-cooling-fan-52pi-zp-0162-41323086020803_fec77402-23fa-4c09-ad8c-2f26e86c840c.jpg?v=1793495941"},{"product_id":"kksb-tall-aluminium-case-for-raspberry-pi-4","title":"KKSB Tall Aluminium Case For Raspberry Pi 4","description":"\u003cp\u003eThe KKSB Raspberry Pi 4 Aluminium Case is a high-quality and durable case designed to protect your \u003c\/p\u003e\u003cp\u003eRaspberry Pi 4\u003c\/p\u003e whilst also providing optimal cooling and functionality. Made from black anodized aluminium, this case is both sleek and durable.\n\u003cp\u003eIt is specifically designed to support the \u003c\/p\u003e\u003cp\u003eKKSB PWM High-Performance Cooling Tower with PWM Fan\u003c\/p\u003e (\u003cstrong\u003enot included\u003c\/strong\u003e), which has an automatic start and stop function depending on the CPU temperature. This means that even during extensive processing, you can keep your Raspberry Pi processor cool and running smoothly.\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: The KKSB Raspberry Pi 4 Tall Case has \u003cstrong\u003espace for a cooler of up to a height of 45mm (maximum)\u003c\/strong\u003e. T\u003cspan dir=\"ltr\"\u003ehe case \u003cstrong\u003edoes not fit the 52Pi ICE Tower cooler\u003c\/strong\u003e without modification\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe removable case walls have plenty of ventilation slots for optimal cooling, and the rear wall of the case has space for a 40-Pin GPIO cable, allowing you to access the Raspberry Pi 4 Pin Header without having to remove the case. Additionally, the case features cutouts for most Raspberry Pi 4 ports and interfaces, providing optimal functionality without having to remove the parts of the case.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe rubber feet along the base of the enclosure help to avoid scratches and keep the case stable. It also has two pre-cut mounting holes, allowing you to fit the case to a wall or on the back of a monitor. This gives you the flexibility to use the case in a variety of settings, whether you're using it as a desktop computer or as a wall-mounted device.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eAssembly instructions are available here.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Aluminium\u003c\/li\u003e\n\u003cli\u003eFinishing: Anodized Black\u003c\/li\u003e\n\u003cli\u003eBoard Compatibility: Raspberry Pi 4\u003c\/li\u003e\n\u003cli\u003eInterface Support: Cutouts for most ports and interfaces including space for a 40-Pin GPIO cable\u003c\/li\u003e\n\u003cli\u003eVentilation: Space for PWM Tower Cooling Fan | Large air vents on the front and rear wall\u003c\/li\u003e\n\u003cli\u003eOrientation: Rubber Feet for desktop orientation | Precut keyholes for wall mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBenefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe cooler will keep the Raspberry Pi processor cool even during extensive processing\u003c\/li\u003e\n\u003cli\u003eThe case provides optimal functionality and compatibility with most ports and interfaces\u003c\/li\u003e\n\u003cli\u003eThe case is easy to install and has ample ventilation, which helps to keep your Raspberry Pi running smoothly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x KKSB Raspberry Pi 4 Aluminium Case\u003c\/li\u003e\n\u003cli\u003eFasteners\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi \u003c\/strong\u003e\u003cstrong\u003eand tower cooler\/fan not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eAssembly Instructions\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006869803163,"sku":"DGHLC 7517675126979","price":10.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/kksb-tall-aluminium-case-for-raspberry-pi-4-kksb-105276-40109962199235_49d09662-7792-4c4c-9db6-cf29d37aa130.jpg?v=1793495954"},{"product_id":"aluminium-nas-case-for-pi-4-with-quiet-cooling-fan","title":"Aluminium NAS Case For Pi 4 With Quiet Cooling Fan","description":"\u003cp\u003eThis aluminium case for the \u003c\/p\u003e\u003cp\u003eRaspberry Pi 4\u003c\/p\u003e is 52Pi's answer to the usual wish list for an ultimate Raspberry Pi case - excellent cooling, SSD\/storage options, protection and great looks!\n\u003cp\u003eThe case includes its own M.2 SATA SSD adapter board which allows you to add your own \u003c\/p\u003e\u003cp\u003eM.2 SATA SSD\u003c\/p\u003e (SATA M.2 2280-format, \u003cstrong\u003enot NVME\u003c\/strong\u003e) for compact, high-volume storage or as a boot option. The adapter board connects to your Raspberry Pi 4 via the included USB-to-USB adapter, allowing a fast USB 3.0 connection.\n\u003cp\u003eAlso included is a dedicated heatsink and 3-pin cooling fan, which efficiently and quietly cools your Raspberry Pi 4 and can be set to only turn on when a specified CPU temperature is reached (via Raspberry Pi OS). Cooling is further aided by the aluminium body of the case. The acrylic lid also includes vents to help with cooling and ensures wireless signals have a clear route.\u003c\/p\u003e\n\u003cp\u003eRubber anti-slip feet complete the enclosure, ensuring stability and minimal vibrations.\u003c\/p\u003e\n\u003cp\u003eWe also stock a \u003c\/p\u003e\u003cp\u003etaller version which comes with a low-profile ICE Tower cooler\u003c\/p\u003e.\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eNVMA M.2 SSDs \u003cspan\u003ecannot\u003c\/span\u003e be used in this case\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot recommended for use with WD Blue SSDs\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot recommended for use with 2TB SSDs (anything lower in capacity should work fine)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eRemove the lid's protective film before assembling\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi and M.2 SSD are not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAccommodates M.2 SATA SSDs\u003c\/li\u003e\n\u003cli\u003eAluminium case, acrylic top cover\u003c\/li\u003e\n\u003cli\u003eQuiet temperature-controlled cooling fan \u0026amp; heatsink\u003c\/li\u003e\n\u003cli\u003eAccess to all ports\u003c\/li\u003e\n\u003cli\u003eSlot for GPIO access via wires\u003c\/li\u003e\n\u003cli\u003eRubber anti-slip feet strips\u003c\/li\u003e\n\u003cli\u003eSupports M.2 SATA SSD B Key 2280 Only\u003c\/li\u003e\n\u003cli\u003eSupports Raspberry Pi 4 Model B Only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Aluminum NAS case\u003c\/li\u003e\n\u003cli\u003e1 x Quiet cooling fan + heatsink unit\u003c\/li\u003e\n\u003cli\u003e1 x Acrylic Top cover\u003c\/li\u003e\n\u003cli\u003e1 x Aluminum bottom cover\u003c\/li\u003e\n\u003cli\u003e1 x 52Pi Mini M.2 SATA SSD Adapter board\u003c\/li\u003e\n\u003cli\u003e1 x USB adapter for the SSD adapter board\u003c\/li\u003e\n\u003cli\u003e4 x Copper pillar\u003c\/li\u003e\n\u003cli\u003e2 x M2.5 nut\u003c\/li\u003e\n\u003cli\u003e4 x M2.5 Flat head screw\u003c\/li\u003e\n\u003cli\u003e2 x Thermal Pad\u003c\/li\u003e\n\u003cli\u003e1 x Hex wrench\u003c\/li\u003e\n\u003cli\u003e4 x Hexagon socket head screw for the top cover\u003c\/li\u003e\n\u003cli\u003e2 x Rubber anti-slipper pad\u003c\/li\u003e\n\u003cli\u003e1 x Instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eProduct Wiki\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006875472027,"sku":"DGHLC 7562403184835","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/aluminium-nas-case-for-pi-4-with-quiet-cooling-fan-52pi-zp-0140-40477420716227_e6ffddd9-b0d6-4be8-bf77-ed2a046e1956.jpg?v=1793495967"},{"product_id":"ice-tower-raspberry-pi-4-cpu-cooler","title":"ICE Tower Raspberry Pi 4 CPU Cooler","description":"\u003cp\u003eIf you’re looking for the best Raspberry Pi cooling solution money can buy – look no further.\u003c\/p\u003e\n\u003cp\u003eThe ICE Tower is a game changer – bringing desktop PC level cooling to the Raspberry Pi world.\u003c\/p\u003e\n\u003cp\u003eJust like an aftermarket cooler for a full-size desktop PC, the ICE tower uses a central 5mm copper heatpipe to quickly conduct heat away from the Raspberry Pi CPU. Heat moves up into the metal cooling tower, allowing the included 7-blade LED fan to blow cool, crisp air over the fins, bringing temperatures down lower than any of our other cooling solutions can provide.\u003c\/p\u003e\n\u003cp\u003eThe fan itself is powered via your Raspberry Pi GPIO (5V and GND pins) meaning no additional external power supply is required.\u003c\/p\u003e\n\u003cp\u003eNot only is the ICE Tower a fantastic cooler, it also comes with the hardware and spares you need to swap this out with your other Raspberry Pis.\u003c\/p\u003e\n\u003cp\u003eMounting brackets are included for your \u003c\/p\u003e\u003cp\u003eRaspberry Pi 4 Model B\u003c\/p\u003e but also for a Raspberry Pi 3 or 3B+. Not only that but spare thermal pads (3 in total) are also provided for your convenience. This kit has been designed with the busy maker in mind!\n\u003cp\u003eIf you prefer, thermal compound can also be used in place of the thermal pad. Experiment with your favourite PC thermal compound and bring those temperatures down even further!\u003c\/p\u003e\n\u003cp\u003eThe ICE Tower really is the ultimate premium cooling solution for the Raspberry Pi.\u003c\/p\u003e\n\u003ch2\u003eAlternative ICE Towers!\u003c\/h2\u003e\n\u003cp\u003eWe also stock the \u003c\/p\u003e\u003cp\u003eLow-profile ICE Tower\u003c\/p\u003e with RGB LED fan (for compact projects), and a \u003cp\u003eType B version\u003c\/p\u003e which has a different fan orientation, blowing air away from the board.\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDC 5V Power in (Can be powered by the Raspberry Pi)\u003c\/li\u003e\n\u003cli\u003eIce Tower Structure\u003c\/li\u003e\n\u003cli\u003e5mm copper tube\u003c\/li\u003e\n\u003cli\u003eSuper heat dissipation\u003c\/li\u003e\n\u003cli\u003eRated power 0.4W @5V, 0.08A\u003c\/li\u003e\n\u003cli\u003eSuper Cool fan background light (Blue Color)\u003c\/li\u003e\n\u003cli\u003eEasy to setup\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 3B+\/4B\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006880321691,"sku":"DGHLC 4319764512830","price":11.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/ice-tower-raspberry-pi-4-cpu-cooler-52pi-ep-0107-13337351225406_c81d8dd9-0c72-43c0-9064-f2f111043720.jpg?v=1793495976"},{"product_id":"abs-fan-case-for-raspberry-pi-5","title":"ABS Fan Case For Raspberry Pi 5","description":"\u003cp\u003eThis case for \u003c\/p\u003e\u003cp title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/p\u003e features a customisable strip-pattern ventilation design, not only adding a touch of style but also promoting effective heat dissipation. The decorative strip on top of the case can be replaced to get the look you want (three colour strips are included!). It's made from high-quality ABS, offering protection against physical impacts.\n\u003cp\u003eThe case \u003cstrong\u003eincludes\u003c\/strong\u003e an \u003c\/p\u003e\u003cp title=\"Armour Lite V5 Heatsink for Raspberry Pi 5\"\u003eArmour Lite V5 heatsink\u003c\/p\u003e, enhancing the case's cooling efficiency. This means even when your Raspberry Pi 5 is under a heavy workload, it remains cool and stable. The heatsink's fan has a JST-interface for the dedicated Raspberry Pi 5 fan header, allowing software fan control and keeps your GPIO pins free for your project at the same time.\n\u003cp\u003eThis case is available in black or white, \u003cstrong\u003eplease select a colour before purchasing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour Options\u003c\/strong\u003e: Choose between classic black or pristine white to complement your style and surroundings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect Fit\u003c\/strong\u003e: Designed specifically for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilation Design\u003c\/strong\u003e: Stylish strip-patterned ventilation holes for effective heat dissipation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact and Cool\u003c\/strong\u003e: The compact design and horizontal heatsink contribute to efficient cooling, even under heavy workloads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling Fan\u003c\/strong\u003e: Equipped with a JST interface for the Pi 5 fan header. The fan supports software speed adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 150g\u003c\/li\u003e\n\u003cli\u003eCase size: H: 31mm x L: 94mm x W: 63mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eProduct Wiki\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x ABS case for Raspberry Pi 5 (\u003cstrong\u003eselect colour before adding to cart\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003e1x Heat sink with adjustable speed fan\u003c\/li\u003e\n\u003cli\u003e4x Nylon screws for the heat sink\u003c\/li\u003e\n\u003cli\u003e4x M2.5 Self-tapping screw\u003c\/li\u003e\n\u003cli\u003e10x Thermal pads\u003c\/li\u003e\n\u003cli\u003e3x Colour strips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Black","offer_id":50006889922715,"sku":"DGHLC 7693831372995","price":8.75,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":50006889955483,"sku":"DGHLC 7693831372995-2","price":8.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/abs-fan-case-for-raspberry-pi-5-52pi-zp-0167-41322553802947_fed596e1-8b75-4cd4-8a11-c083654a7b79.jpg?v=1793495987"},{"product_id":"power-fan-hat-for-raspberry-pi","title":"Power + Fan HAT For Raspberry Pi","description":"\u003cp\u003eThe Power + Fan HAT for the Raspberry Pi is a combination of two of BCRobotic's most popular \u003c\/p\u003e\u003cp\u003eRaspberry Pi\u003c\/p\u003e add-ons.\n\u003cp\u003eThis board is based on the same beefy 3A 5V DC\/DC converter found on our\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003ePower\u003c\/p\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003cp\u003ePower RTC HAT\u003c\/p\u003e\u003cspan\u003e \u003c\/span\u003eand features the same 40mm fan used on our\u003cspan\u003e \u003c\/span\u003eFan HAT. Combined, this will comfortably power your Pi from 7-16V while keeping it cool under heavy load.\n\u003cp\u003eThe power supply is fused and reverse polarity protected and provides power to the Pi by way of the GPIO header. The Fan runs as long as power is available. Simply connect your DC supply to the screw terminals and this board will keep your Pi3 \/ 3+ \/ 4 happy running under heavy load all day long! \u003cstrong\u003eWe recommend keeping the input voltage to 7-16VDC\u003c\/strong\u003e to prevent the regulator from getting too warm.\u003c\/p\u003e\n\u003cp\u003eFinally, we have also added an optional 2 pin footprint on the board for a 2.54mm \/ 0.100” connector for use as a soft shutdown\/restart. With\u003cspan\u003e \u003c\/span\u003e\u003ccode\u003edtoverlay=gpio-shutdown\u003c\/code\u003e\u003cspan\u003e \u003c\/span\u003eenabled in your \/boot\/config.txt file, connecting these two pins will trigger the Pi to perform a shutdown. Press the button again, and the Pi will boot right up. We recommend using a momentary pushbutton for this feature. At this time, the Pi 4 is only capable of shutdown and will not restart without\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003emodifying the bootloader\u003c\/p\u003e.\n\u003cp\u003eThis version of the board is fully assembled and requires no soldering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eRaspberry Pi not included.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e5V 3A Output to power Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eIntegrated 40mm Fan\u003c\/li\u003e\n\u003cli\u003ePi 3 \/ 3A+ \/ 3B+ \/ Pi 4 Compatible\u003c\/li\u003e\n\u003cli\u003eConnector for shutdown \/ restart button\u003c\/li\u003e\n\u003cli\u003eNo Soldering Required!\u003c\/li\u003e\n\u003cli\u003eFused and Reverse Polarity Protected\u003c\/li\u003e\n\u003cli\u003eRecommended Input: 7 – 16VDC\u003c\/li\u003e\n\u003cli\u003eIdeal for 12V power systems\u003c\/li\u003e\n\u003cli\u003eFully assembled and ready to use!\u003c\/li\u003e\n\u003cli\u003eWeight: 39g\u003c\/li\u003e\n\u003cli\u003eManufactured in Canada\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006904242331,"sku":"DGHLC 6665475686595","price":10.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/power-fan-hat-for-raspberry-pi-bcrobotics-103106-28511047123139_95ebc5f7-37ff-4441-aa30-0c3babc01059.jpg?v=1793495998"},{"product_id":"argon-one-v2-raspberry-pi-4-case","title":"Argon ONE V2 Raspberry Pi 4 Case","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003eThe Argon ONE V2 Case is one of our best-selling \u003c\/p\u003e\u003cp\u003eRaspberry Pi 4\u003c\/p\u003e cases - and it just got even better with the \u003cstrong\u003enew V2 version\u003c\/strong\u003e, which now features \u003cp\u003efull-size HDMI\u003c\/p\u003e ports and a built-in infrared receiver.\n\u003cp\u003eThe case is with aluminium alloy and polished with a grey finish, making your Raspberry Pi look modern, sleek, and stylish. The case lid acts as a heatsink with the metal top cover directly connected to the CPU via a thermal pad. This, combined with the case vents and included cooling fan board, offers outstanding cooling for your Raspberry Pi 4.\u003c\/p\u003e\n\u003cp\u003ePorts are rerouted to the rear of the case keeping messy cables in one area, making it perfect for a desk case, TV box and more. Alongside this, a configurable power button allows you to shut down and restart your Raspberry Pi without pulling cables.\u003c\/p\u003e\n\u003cp\u003eThe Raspberry Pi's GPIO pins are also accessible via a removable magnetic top cover, which exposes the colour-coded and labelled pins for ultimate convenience (note: most HATs will not directly connect to the GPOIO section).\u003c\/p\u003e\n\u003cp\u003eUltimately, the Argon One Case combines functionality and futuristic aesthetics all in one fantastic package.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eInstruction manual\u003c\/p\u003e (printed manual included in case box)\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003e\u003cstrong\u003e**New for V2**\u003c\/strong\u003e\u003c\/em\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFull-size HDMI\u003c\/p\u003e ports - Use your existing cables!\u003c\/li\u003e\n\u003cli\u003eInfrared receiver - perfect for media centre projects!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003eSleek Aluminium Enclosure\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eMade with aluminium alloy and polished with a modern Space Grey finish for stunning aesthetics and functionality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003ePassive \u0026amp; Active Cooling\u003cul\u003e\n\u003cli\u003eThe case top provides passive cooling for the Raspberry Pi, alongside a software controllable fan inside the case for temperature management.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003eEasy Assembly \u0026amp; Neat Cable Management\u003cul\u003e\n\u003cli\u003eAssembling the case with the Raspberry Pi is easy. Installing the Argon ONE script unlocks the full functionality of the Argon ONE in a single line. All of the ports are accessed at the rear of the case, making projects manageable with minimal cable clutter and easy cleaning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003eProper System Shut-down\u003cul\u003e\n\u003cli\u003eA power button is installed on the case to prevent file damage. The button can be configured to provide safe shut down, reboot or forced shutdown.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli\u003eMagnetic Removable Top \u0026amp; Access to GPIO\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe PCB board built into the case provides separate power sources to the fan and power switch, as well as extending the GPIO pins to use the case in multiple projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cb\u003eAmazing Cooling\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eThe aluminium alloy case doesn’t just make the computer look cool, but it also cools the computer too.\u003c\/p\u003e\n\u003cp\u003eThe case has an extension that connects to the processor with a thermal cooling pad so that heat from the processor is transferred to the case. This means that the case becomes a heat sink passively cooling the motherboard so that the computer can work without building up much heat.\u003c\/p\u003e\n\u003cp\u003eTo top it off, the case comes with a built-in PCB board with a fan attached to actively cool the Raspberry Pi further. These two cooling systems combined guarantee long-lasting use without overheating.\u003c\/p\u003e\n\u003cp\u003eThe fan speed can be configured anytime via the terminal, as well as the conditions for changing the fan speed passively.\u003c\/p\u003e\n\u003ch2\u003e\u003cb\u003eMinimal Clutter\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eAll the ports of the Raspberry Pi are accessed at the back to ensure that Cable clutter is at a minimum. This also makes the computer easy to tidy and pack up when on the move without compromising any ports of the motherboard.\u003c\/p\u003e\n\u003ch2\u003e\u003cb\u003eEasy to Assemble\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eThe case comes with a top and bottom, 4 screws, a built-in PCB Board, a silicon cooling pad, and a PCB Board that extends the audio and converts the micro-HDMI ports to full-size HDMI.\u003c\/p\u003e\n\u003cp\u003eAssembling the Raspberry Pi with the case though is as easy as 1, 2, 3 or A, B, C. Combining the parts together is simple and intuitive. All that’s needed is a four-way screwdriver, and that’s just to tighten the screws to the bottom of the case. No special tools needed at all.\u003c\/p\u003e\n\u003cp\u003eAfter assembling the computer and installing the OS on the SD Card, a one-line script needs to be typed into the terminal so that the power button and fan can be used.\u003c\/p\u003e\n\u003ch2\u003e\u003cb\u003eAccessible GPIO pins\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eThe case was designed with one main purpose, protecting the Raspberry Pi without compromising the full functionality of the motherboard.\u003c\/p\u003e\n\u003cp\u003eThe built-in PCB board extends the GPIO pins of the Raspberry Pi. When the pins aren’t in use, they’re covered and protected by a magnetic removable top. This makes the Pins accessible at all times, allowing the computer to be used in various electronics projects.\u003c\/p\u003e\n\u003ch2\u003e\u003cb\u003eSafe Power Button\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003eThe case comes with a simple power button to turn the computer on and off while ensuring that the files stored are safe. When the one-line script is installed, the power button has multiple functions depending on how the button is pressed\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006908371099,"sku":"DGHLC 4358069321790","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/argon-one-v2-raspberry-pi-4-case-argon40-arg-010-23092081000643_b5dc659e-843d-4445-adba-6e8b166e512c.jpg?v=1793496012"},{"product_id":"aluminium-pi-4-nas-case-with-low-profile-ice-tower-cooler","title":"Aluminium Pi 4 NAS Case With Low-Profile ICE Tower Cooler","description":"\u003cp\u003eThis aluminium case for the \u003c\/p\u003e\u003cp\u003eRaspberry Pi 4\u003c\/p\u003e is 52Pi's answer to the usual wish list for an ultimate Raspberry Pi case - \u003cem\u003eincredible\u003c\/em\u003e cooling, SSD\/storage options, protection and great looks!\n\u003cp\u003eThe case includes its own M.2 SATA SSD adapter board which allows you to add your own \u003c\/p\u003e\u003cp\u003eM.2 SATA SSD\u003c\/p\u003e (SATA M.2 2280-format, \u003cstrong\u003enot NVME\u003c\/strong\u003e) for compact, high-volume storage or as a boot option. The adapter board connects to your Raspberry Pi 4 via the included USB-to-USB adapter, allowing a fast USB 3.0 connection.\n\u003cp\u003eAlso included is a \u003c\/p\u003e\u003cp\u003eLow-Profile ICE Tower Cooler\u003c\/p\u003e with a 3-pin fan allowing temperature control via Raspberry Pi OS! The case has been designed to perfectly accommodate this cooler. Cooling is further aided by the aluminium body of the case. The acrylic lid also includes vents to help with cooling and ensures wireless signals have a clear route.\n\u003cp\u003eRubber anti-slip feet complete the enclosure, ensuring stability and minimal vibrations.\u003c\/p\u003e\n\u003cp\u003eWe also stock a \u003c\/p\u003e\u003cp\u003eshorter version with a standard fan + heatsink unit\u003c\/p\u003e.\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eNVMA M.2 SSDs \u003cspan\u003ecannot\u003c\/span\u003e be used in this case\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot recommended for use with WD Blue SSDs\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot recommended for use with 2TB SSDs (anything lower in capacity should work fine)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eRemove the lid's protective film before assembling\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi and M.2 SSD are not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAccommodates M.2 SATA SSDs\u003c\/li\u003e\n\u003cli\u003eAluminium case, acrylic top cover\u003c\/li\u003e\n\u003cli\u003eICE Tower Cooler\u003c\/li\u003e\n\u003cli\u003eTemperature-controlled fan\u003c\/li\u003e\n\u003cli\u003eAccess to all ports\u003c\/li\u003e\n\u003cli\u003eSlot for GPIO access via wires\u003c\/li\u003e\n\u003cli\u003eRubber anti-slip feet strips\u003c\/li\u003e\n\u003cli\u003eSupports M.2 SATA SSD B Key 2280 Only\u003c\/li\u003e\n\u003cli\u003eSupports Raspberry Pi 4 Model B Only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Aluminum case\u003c\/li\u003e\n\u003cli\u003e1 x Acrylic Top cover\u003c\/li\u003e\n\u003cli\u003e1 x Aluminum bottom cover\u003c\/li\u003e\n\u003cli\u003e1 x 52Pi Mini M.2 SATA SSD Adapter board\u003c\/li\u003e\n\u003cli\u003e1 x USB adapter for the SSD adapter board\u003c\/li\u003e\n\u003cli\u003e1 x ICE Tower cooler\u003c\/li\u003e\n\u003cli\u003e2 x ICE Tower bracket\u003c\/li\u003e\n\u003cli\u003e4 x Copper pillar\u003c\/li\u003e\n\u003cli\u003e2 x M2.5 screws for ICE tower brackets\u003c\/li\u003e\n\u003cli\u003e4 x M2.5 Flat head screw\u003c\/li\u003e\n\u003cli\u003e2 x Thermal Pad\u003c\/li\u003e\n\u003cli\u003e1 x hex wrench\u003c\/li\u003e\n\u003cli\u003e4 x Hexagon socket head screw for the top cover\u003c\/li\u003e\n\u003cli\u003e2 x Rubber anti-slipper pad\u003c\/li\u003e\n\u003cli\u003e1 x Instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eProduct Wiki\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006922297499,"sku":"DGHLC 7562417897667","price":23.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/aluminium-pi-4-nas-case-with-low-profile-ice-tower-cooler-52pi-zp-0141-40477499064515_b256031a-c5a7-4d94-b6e8-00ed330c0faf.jpg?v=1793496023"},{"product_id":"type-b-low-profile-ice-tower-raspberry-pi-4-cooler","title":"Type B Low-Profile ICE Tower Raspberry Pi 4 Cooler","description":"\u003cp\u003eThis is the \u003cstrong\u003eType B version\u003c\/strong\u003e of the 52Pi Low-profile ICE Tower cooler for the \u003c\/p\u003e\u003cp\u003eRaspberry Pi\u003c\/p\u003e, offering an alternative layout with the fan pushing the hot air away from the Raspberry Pi. This model also uses a lower-profile 4010 fan (no LEDs) which hides behind the heatsink for a cleaner look and greater protection.\n\u003cp\u003eThe cooling concept is otherwise the same as the \u003c\/p\u003e\u003cp\u003eoriginal ICE Tower\u003c\/p\u003e and \u003cp\u003eLow-profile ICE Tower\u003c\/p\u003e. Just like an aftermarket cooler for a full-size desktop PC, it uses a central 5mm copper heatpipe to quickly conduct heat away from the Raspberry Pi CPU. Heat moves up into the heat pipes, allowing the included fan to blow cool, crisp air over the fins and away from the board, bringing temperatures down quickly and efficiently.\n\u003cp\u003eThe fan is powered by the Raspberry Pi's GPIO pins (5V and GND) removing the need for a separate dedicated power supply.\u003c\/p\u003e\n\u003cp\u003eHardware is included to mount this to your Raspberry Pi 4 or Raspberry Pi 3B+\/3\/2\/B+, including mounting brackets, fixings and thermal pads. \u003cspan\u003eIf you prefer, a thermal compound can also be used in place of the thermal pad. Experiment with your favourite PC thermal compound and bring those temperatures down even further!\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatible with the \u003cspan\u003eV1\u003c\/span\u003e Metal Case!\u003c\/h2\u003e\n\u003cp\u003eWe have tested this cooler with the \u003c\/p\u003e\u003cp\u003eLow-profile Metal Case\u003c\/p\u003e and the \u003cspan\u003e\u003cstrong\u003eV1 version\u003c\/strong\u003e\u003c\/span\u003e fits perfectly as long as you have all of the fixings from the fan available.\n\u003ch2\u003eAlternative ICE Towers!\u003c\/h2\u003e\n\u003cp\u003eWe also stock the original \u003c\/p\u003e\u003cp\u003eICE Tower\u003c\/p\u003e with RGB LED fan, and the \u003cp\u003eoriginal Low-profile ICE Tower with RGB LED fan\u003c\/p\u003e.\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAlternative low-profile ICE Tower\u003c\/li\u003e\n\u003cli\u003eFan layout that keeps hot air away from the Raspberry Pi and adds protection\u003c\/li\u003e\n\u003cli\u003e4010 5V DC fan (powered by the Raspberry Pi GPIO)\u003c\/li\u003e\n\u003cli\u003eLow-profile\u003c\/li\u003e\n\u003cli\u003e5mm copper tube\u003c\/li\u003e\n\u003cli\u003eSuper heat dissipation\u003c\/li\u003e\n\u003cli\u003eRated power 0.4W @5V, 0.08A\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 4, 3B+, 3, 2, B+\u003c\/li\u003e\n\u003cli\u003eCompatible with the \u003cspan\u003e\u003cstrong\u003eV1\u003c\/strong\u003e\u003c\/span\u003e \u003cp\u003emetal case\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAssembly\u003c\/h2\u003e\n\u003cp\u003eThe assembly is the same for all compatible models of Raspberry Pi:\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/WosbPI4_11_1.jpg?v=1658834715\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/WosbPI4_12_1.jpg?v=1658834715\" alt=\"\"\u003e\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006930096283,"sku":"DGHLC 7347439927491","price":11.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/type-b-low-profile-ice-tower-raspberry-pi-4-cooler-52pi-ep-0132-38513132142787_aa19b62d-4945-4c9e-8e9a-b51b86373419.jpg?v=1793496035"},{"product_id":"tall-aluminium-cooling-case-for-raspberry-pi-5","title":"Tall Aluminium Cooling Case For Raspberry Pi 5","description":"\u003cp\u003eThis attractive aluminium alloy case from 52Pi has been designed specifically for the \u003c\/p\u003e\u003cp title=\"Raspberry Pi 5\"\u003eRaspberry Pi 5\u003c\/p\u003e and includes a cooling fan and heatsinks for a complete enclosure solution for your board.\n\u003cp\u003eAll ports and pins are accessible, \u003cspan\u003eincluding GPIO, HDMI, USB and the SD card slot.\u003c\/span\u003e The top panel is made from acrylic, ensuring no interference with wireless signals.\u003c\/p\u003e\n\u003cp\u003eWith side vents, lid airflow gaps and the included cooling fan with heatsinks, your Raspberry Pi will remain cool even under the heaviest loads.\u003c\/p\u003e\n\u003cp\u003eThe metal colour? It's not black, it's not silver, it's not blue...it's something in-between and we LOVE it!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: The \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5\u003c\/strong\u003e\u003c\/p\u003e\u003cstrong\u003e not included\u003c\/strong\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eAluminium alloy case\u003c\/li\u003e\n\u003cli\u003eAcrylic panel lid for uninterrupted wireless signals\u003c\/li\u003e\n\u003cli\u003eIncluded fan with Pi 5 fan header connector\u003c\/li\u003e\n\u003cli\u003eCopper heatsinks included\u003c\/li\u003e\n\u003cli\u003eEasy to assemble\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: L: 95mm x W: 63mm x H: 45mm\u003c\/li\u003e\n\u003cli\u003eWeight: 200g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eProduct Wiki\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Aluminium Case\u003c\/li\u003e\n\u003cli\u003e1x Adjustable Speed Fan\u003c\/li\u003e\n\u003cli\u003e1x Screw Driver\u003c\/li\u003e\n\u003cli\u003e1x Allen Key\u003c\/li\u003e\n\u003cli\u003e4x Nuts\u003c\/li\u003e\n\u003cli\u003e4x M2.5 Ball Head Long Screws\u003c\/li\u003e\n\u003cli\u003e2x Anti-Slip Rubber Feet\u003c\/li\u003e\n\u003cli\u003e4x Flat Head Screws\u003c\/li\u003e\n\u003cli\u003e4x Hexagon Socket Screws\u003c\/li\u003e\n\u003cli\u003e4x Copper Pillars\u003c\/li\u003e\n\u003cli\u003e4x Copper Nuts\u003c\/li\u003e\n\u003cli\u003e4x Copper Heat Sinks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006933897371,"sku":"DGHLC 7683083272387","price":11.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/aluminium-cooling-case-for-raspberry-pi-5-52pi-zp-0164-41322122739907_cc899f13-3876-402f-ae14-798c4bb1ebd6.jpg?v=1793496043"},{"product_id":"ice-tower-cpu-cooler-for-raspberry-pi-5","title":"ICE Tower CPU Cooler For Raspberry Pi 5","description":"\u003cp\u003eThis ICE Tower Cooler is made specifically for \u003c\/p\u003e\u003cp\u003eRaspberry Pi 5\u003c\/p\u003e, designed to keep the temperature of the board within optimal limits, ensuring stable and reliable performance (\u003cem\u003ewhilst looking awesome!\u003c\/em\u003e).\n\u003cp\u003eIt consists of a tall tower-style heatsink with multiple aluminium fins and a high-quality fan. The tower design allows for maximum surface area, enhancing the cooling performance.\u003c\/p\u003e\n\u003cp\u003eThe included fan is positioned at the side of the tower and blows air directly onto the heatsink. It helps to accelerate the heat dissipation process by increasing airflow over the fins.\u003c\/p\u003e\n\u003cp\u003eInstallation of the Ice Tower Cooler is straightforward and requires attaching it to the Raspberry Pi 5's GPIO header. The cooler is designed to fit securely and provide proper contact with the processor and other heat-generating components on the Raspberry Pi 5 board.\u003c\/p\u003e\n\u003cp\u003eUsing the Ice Tower Cooler can help prevent overheating and potential performance throttling of the Raspberry Pi 5, especially during intensive tasks or in environments with limited airflow. It can extend the lifespan of the Raspberry Pi 5 and ensure stable operation even under demanding conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: The Raspberry Pi 5 is NOT included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eEfficient Cooling: The tower-style heatsink, made of aluminium, provides excellent heat dissipation\u003c\/li\u003e\n\u003cli\u003eTower Design: The tall tower design with multiple aluminium fins maximizes the surface area for enhanced cooling performance\u003c\/li\u003e\n\u003cli\u003eHigh-Quality Fan: The included fan is positioned at the side of the tower and blows air directly onto the heatsink\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 170g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eProduct Wiki\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Ice Tower cooler with fan for Pi 5\u003c\/li\u003e\n\u003cli\u003e2 x Metal Brackets for Ice Tower cooler\u003c\/li\u003e\n\u003cli\u003e1 x Acrylic bottom panel\u003c\/li\u003e\n\u003cli\u003e1 x Screw driver\u003c\/li\u003e\n\u003cli\u003e6 x M2.5 ball head screw\u003c\/li\u003e\n\u003cli\u003e4 x Hand-tightened copper nut\u003c\/li\u003e\n\u003cli\u003e8 x Copper pillar\u003c\/li\u003e\n\u003cli\u003e4 x Thermal pad for Raspberry Pi 5\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006935961755,"sku":"DGHLC 7680243105987","price":9.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/ice-tower-cpu-cooler-for-raspberry-pi-5-52pi-zp-0180-41253003231427_d377e16e-9410-444a-a239-aa7313056f15.jpg?v=1793496049"}],"url":"https:\/\/thepihutshops.com\/collections\/cooling.oembed","provider":"The Pi Hut","version":"1.0","type":"link"}