{"title":"Components","description":null,"products":[{"product_id":"smt-smd-0805-resistor-and-capacitor-book-3725-pieces","title":"SMT\/SMD 0805 Resistor And Capacitor Book - 3725 Pieces","description":"\u003cp\u003eAlways have the right SMT components at your hand with this awesome 0805 Resistor and Capacitor book set! This book has nice translucent pages filled with cut tape \u003cb\u003eSMT 0805 components\u003c\/b\u003e, sorted, labeled and ready to go. This book has \u003cb\u003e63 5% resistor values, 3025 parts\u003c\/b\u003e and \u003cb\u003e17 capacitor values, 700 parts\u003c\/b\u003e. The nice thing is that you get a good distribution of the resistors, with more 1K and 10KΩ and fewer of the really high values.\u003cbr\u003e\n\n\u003cbr\u003e\n\n63 5% Yageo resistor values:\u003c\/p\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003e\n\u003cb\u003e100 pieces each of the following:\u003c\/b\u003e 0Ω, 1KΩ, 10KΩ\u003c\/li\u003e\n\n\t\u003cli\u003e\n\u003cb\u003e50 pieces each of the following:\u003c\/b\u003e 1Ω, 1.2Ω, 1.5Ω, 2Ω, 2.7Ω, 3.3Ω, 4.3Ω, 5.1Ω, 6.8Ω, 8.2Ω, 10Ω, 12Ω, 15Ω, 20Ω, 27Ω, 33Ω, 43Ω, 51Ω, 68Ω, 82Ω, 100Ω, 120Ω, 150Ω, 200Ω, 270Ω, 330Ω, 430Ω, 510Ω, 680Ω, 820Ω, 1.2KΩ, 1.5KΩ, 2KΩ, 2.7KΩ, 3.3KΩ, 4.3KΩ, 5.1KΩ, 6.8KΩ, 8.2KΩ, 12KΩ, 15KΩ, 29KΩ, 27KΩ, 33KΩ, 43KΩ, 51KΩ, 68KΩ, 82KΩ, 100KΩ\u003c\/li\u003e\n\n\t\u003cli\u003e\n\u003cb\u003e25 pieces each of the following:\u003c\/b\u003e 120KΩ, 150KΩ, 200KΩ, 270KΩ, 330KΩ, 430KΩ, 510KΩ, 680KΩ, 820KΩ, 1MΩ, 2MΩ\u003c\/li\u003e\n\n\u003c\/ul\u003e\n\n\n\n\u003cp\u003e17 Murata capacitor values:\u003c\/p\u003e\n\n\n\n\u003cul\u003e\n\n\t\u003cli\u003e\n\u003cb\u003e100 pieces each of the following:\u003c\/b\u003e 22pF ±5% 50V C0G, 0.1uF ±10% 25V X7R\u003c\/li\u003e\n\n\t\u003cli\u003e\n\u003cb\u003e50 pieces each of the following:\u003c\/b\u003e 27pF ±5% 50V C0G, 33pF ±5% 50V C0G, 100pF ±5% 50V C0G, 0.47uF ±10% X7R, 1.0uF ±10% X7R\u003c\/li\u003e\n\n\t\u003cli\u003e\n\u003cb\u003e25 pieces each of the following:\u003c\/b\u003e 15pF ±5% 50V C0G, 47pF ±5% 50V C0G, 68pF ±5% 50V C0G, 82pF ±5% 50V C0G, 120pF ±5% 50V C0G, 150pF ±5% 50V C0G, 180pF ±5% 50V C0G, 220pF ±5% 50V C0G, 1nF ±10% 50V X7R,10nF ±10% 50V X7R\u003c\/li\u003e\n\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e\n\u003cp\u003e\u003cb\u003eDimensions:\u003c\/b\u003e 7.5\" x 5.5\" x 1.25\" (19cm x 14cm x 3.5cm)\u003cbr\u003e \u003cbr\u003e \u003cb\u003eWeight:\u003c\/b\u003e 375 grams (13 oz)\u003cbr\u003e \u003cbr\u003e 63 5% Yageo resistor values:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cb\u003e100 pieces each of the following:\u003c\/b\u003e 0Ω, 1KΩ, 10KΩ\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003e50 pieces each of the following:\u003c\/b\u003e 1Ω, 1.2Ω, 1.5Ω, 2Ω, 2.7Ω, 3.3Ω, 4.3Ω, 5.1Ω, 6.8Ω, 8.2Ω, 10Ω, 12Ω, 15Ω, 20Ω, 27Ω, 33Ω, 43Ω, 51Ω, 68Ω, 82Ω, 100Ω, 120Ω, 150Ω, 200Ω, 270Ω, 330Ω, 430Ω, 510Ω, 680Ω, 820Ω, 1.2KΩ, 1.5KΩ, 2KΩ, 2.7KΩ, 3.3KΩ, 4.3KΩ, 5.1KΩ, 6.8KΩ, 8.2KΩ, 12KΩ, 15KΩ, 29KΩ, 27KΩ, 33KΩ, 43KΩ, 51KΩ, 68KΩ, 82KΩ, 100KΩ\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003e25 pieces each of the following:\u003c\/b\u003e 120KΩ, 150KΩ, 200KΩ, 270KΩ, 330KΩ, 430KΩ, 510KΩ, 680KΩ, 820KΩ, 1MΩ, 2MΩ\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e17 Murata capacitor values:\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cb\u003e100 pieces each of the following:\u003c\/b\u003e 22pF ±5% 50V C0G, 0.1uF ±10% 25V X7R\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003e50 pieces each of the following:\u003c\/b\u003e 27pF ±5% 50V C0G, 33pF ±5% 50V C0G, 100pF ±5% 50V C0G, 0.47uF ±10% X7R, 1.0uF ±10% X7R\u003c\/li\u003e \u003cli\u003e\n\u003cb\u003e25 pieces each of the following:\u003c\/b\u003e 15pF ±5% 50V C0G, 47pF ±5% 50V C0G, 68pF ±5% 50V C0G, 82pF ±5% 50V C0G, 120pF ±5% 50V C0G, 150pF ±5% 50V C0G, 180pF ±5% 50V C0G, 220pF ±5% 50V C0G, 1nF ±10% 50V X7R,10nF ±10% 50V X7R\u003c\/li\u003e \u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n \u003cdiv\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006261858459,"sku":"DGHLC 8306975569","price":23.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/smt-smd-0805-resistor-and-capacitor-book-3725-pieces-the-pi-hut-ada441-28610745303235_4623de21-aa52-4efd-9fc7-5e1445c18de9.jpg?v=1793492300"},{"product_id":"gps-antenna-external-active-antenna-3-5v-28db-5-meter-sma","title":"GPS Antenna - External Active Antenna - 3-5V 28dB 5 Meter SMA","description":"\u003cp\u003eGive your Ultimate GPS V3 a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. It's got a 5 meter long cable so it will easily reach wherever you need it to. The antenna is magnetic so it will stick to the top of a car or truck (or any other steel structure)\u003cbr\u003e\u003cbr\u003eComes with a standard SMA connector on the end. If you want to connect to our Ultimate GPS V3 module, be sure to pick up a uFL to SMA adapter!\u003cbr\u003e\u003cbr\u003eGPS not included.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eAll technical specifications including dimensions are in the datasheet\u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n \u003cdiv\u003e\u003cdiv\u003e\u003c\/div\u003e\u003c\/div\u003e \u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006262251675,"sku":"DGHLC 8307015313","price":11.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/gps-antenna-external-active-antenna-3-5v-28db-5-meter-sma-the-pi-hut-ada960-28610295169219_7b4d8eeb-3b4c-4218-a296-0a72159a1e36.jpg?v=1793492306"},{"product_id":"extra-long-force-sensitive-resistor-fsr-interlink-408","title":"Extra-long Force-sensitive Resistor (FSR) (Interlink 408)","description":"\u003cp\u003eFSRs are sensors that allow you to detect physical pressure, squeezing and weight. They are simple to use and low cost. This sensor is a Interlink model 408 FSR with a massive 1\/4-inch x 24-inch sensing region. You can press anywhere along the strip and the pressure will be recognized. Note that this sensor can't detect \u003cem\u003ewhere\u003c\/em\u003e on the strip you pressed (for that, check out our ribbon soft pots).\u003cbr\u003e\u003cbr\u003eFSRs are basically a resistor that changes its resistive value (in ohms Ω) depending on how much its pressed. These sensors are fairly low cost, and easy to use but they're rarely accurate. They also vary some from sensor to sensor perhaps 10%. So basically when you use FSRs you should only expect to get ranges of response. While FSRs can detect weight, they're a bad choice for detecting exactly how many pounds of weight are on them.\u003cbr\u003e\u003cbr\u003eFSRs are made of plastic and the connection tab is crimped on delicate material. The best way to connect to these is to simply plug them into a breadboard or use a clamp-style connector like alligator clips, female header, or a terminal block. It is possible to solder onto the tabs but you must be very fast because if your iron is not good quality or you dally even a few seconds, you will melt the plastic and ruin the FSR! \u003cstrong\u003eDon't attempt to solder directly to your FSR unless you are absolutely sure you have the skills to do so.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eFor a full tutorial with wiring diagrams, code examples and project ideas, please \u003c\/p\u003e\u003cp\u003eread the FSR tutorial page\u003c\/p\u003e!\u003cbr\u003e\u003cbr\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 24in\/609.6mm\u003c\/li\u003e\n\u003cli\u003eWidth: 15.33mm\/0.6in\u003c\/li\u003e\n\u003cli\u003eThickness: 0.57mm\/0.023in\u003c\/li\u003e\n\u003cli\u003eWeight: 5.03g\/0.177oz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eThe FSR datasheet contains force\/resistance graphs, diagrams, etc!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006267363483,"sku":"DGHLC 8306604753","price":12.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/extra-long-force-sensitive-resistor-fsr-interlink-408-the-pi-hut-ada1071-28610375811267_c4fa83ca-f90c-4c27-b689-1787ab9dee25.jpg?v=1793492310"},{"product_id":"rugged-metal-pushbutton-22mm-6v-rgb-momentary","title":"Rugged Metal Pushbutton - 22mm 6V RGB Momentary","description":"\u003cp\u003eBy popular demand, we now have rugged metal buttons with a full color RGB LED ring light! These chrome-plated metal buttons are rugged, but certainly not lacking in flair.\u003c\/p\u003e\u003cp\u003eThis is a \u003cstrong\u003e22mm Momentary\u003c\/strong\u003e version of the RGB pushbutton. Simply drill a 22mm hole into any material up to 1\/4\" thick and you can fit these in place – there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a plastic RGB LED ring.\u003cem\u003e \u003c\/em\u003eOn the back there are 4 metal contacts for the RGB LED ring (one anode and 3 cathodes for each red, green, and blue) and 4 spade contacts for the switches.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTo use the RGB LED:\u003c\/strong\u003e Power the anode at 3-6V and light up the red, green, and blue LEDs by pulling their designated contacts to ground as you desire – there's a built in resistor! If you want to use this with a higher voltage, say 12V or 24V, simply add a 1K ohm resistor in series with the LED cathodes to keep the LED current at around 20mA. You can PWM the RGB pins to make any color you like.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTo use the switches:\u003c\/strong\u003e There are two electrically separate SPST switches inside the button. The two inner set of spade contacts are a normally-closed switch. When you press the button, these contacts will open. The outer two spade contacts are a normally-open switch. When you press the button, these contacts will open until it is released.\u003c\/p\u003e\u003cp\u003eThe switch and LED are electrically separated, so to change the color, use a microcontroller to both read the contact pins and toggle the color control pins.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv\u003e \u003cul\u003e\n\u003cli\u003eDrill hole diameter: 22mm\u003c\/li\u003e\n\u003cli\u003eSwitch current: not rated, we recommend no more than 1A \/ 24VDC\u003c\/li\u003e\n\u003cli\u003eSwitch contacts: 2 set, one normally open and one normally closed\u003c\/li\u003e\n\u003cli\u003eMaterial: Chrome plated brass\u003c\/li\u003e\n\u003cli\u003eContact resistance: \u0026lt; 50 mOhm\u003c\/li\u003e\n\u003cli\u003eInsulation resistance: \u0026gt; 1000 Mohm\u003c\/li\u003e\n\u003cli\u003eTemperature: -20 C to +55 C\u003c\/li\u003e\n\u003cli\u003eMechanical life: \u0026gt; 500,000\u003c\/li\u003e\n\u003cli\u003eElectrical life: \u0026gt; 50,000\u003c\/li\u003e\n\u003cli\u003ePanel thickness: 1-7mm\u003c\/li\u003e\n\u003cli\u003eOperating pressure: 1.5 - 2.5 N\u003c\/li\u003e\n\u003cli\u003eOperating stroke: 2mm\u003c\/li\u003e\n\u003cli\u003eLED rated voltage: 6V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e \u003cli\u003e\n\u003cp\u003eDatasheet\u003c\/p\u003e \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006267625627,"sku":"DGHLC 1412158226494","price":8.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/rugged-metal-pushbutton-22mm-6v-rgb-momentary-the-pi-hut-104471-28610320957635_316c3a1e-e715-4984-8ead-f02ecaa2c81b.jpg?v=1793492318"},{"product_id":"super-capacitor-2-5v-700-farad","title":"Super Capacitor - 2.5V 700 Farad","description":"\u003cp\u003eWhen I was studying power supply electronics in school, the instructor always talked about adding BFC's to the circuit - Big Freakin' Capacitors. This here is UHFC - \u003cstrong\u003eUnbelievably Huge\u003c\/strong\u003e Freaking Capacitor. If you have a super-cap project that needs up to 700 \u003cstrong\u003eFarads\u003c\/strong\u003e of capacitance, check it out. Like most super-caps it has a 2.5V-max rated voltage, and remember that unlike a voltage-output battery the voltage drops immediately as it discharges.\u003cbr\u003e\u003cbr\u003eYou can use this as a stand-in for a battery, its huge but can charge fast and doesn't degrade like NiMH or Li-Ion\/LiPoly batteries. We like to refer to this MAXIM super-cap calculator  to figure out how long we can run a project.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSuper capacitors are powerful beasts: the ultra low ESR means that shorting the outputs will create a big spark! Care must be used when working with charged super-caps, these are only for experts who are comfortable with high-current-capable power supplies.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv\u003e \u003cp\u003e\u003cstrong\u003ePlease note\u003c\/strong\u003e: As of Tuesday, June 20th 2017, we are now selling the 700 Farad version of this product instead of the 630 Farad. \u003c\/p\u003e\n\u003cp\u003eDimensions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2.5V rated maximum voltage. 700 Farads.\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eThis datasheet covers the DL series\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e105mm long x 35mm diameter \/ 4.1\" long x 1.4\" diameter\u003c\/li\u003e\n\u003cli\u003eWeight: 135.2g\u003c\/li\u003e\n\u003c\/ul\u003e\n \u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006269919387,"sku":"DGHLC 8306843729","price":11.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/super-capacitor-2-5v-700-farad-the-pi-hut-ada1885-28610421293251_f4df3ac5-d2cd-4319-a1c2-bb9130e35d6e.jpg?v=1793492324"},{"product_id":"programmable-coin-acceptor-hx-616-6-coin","title":"Programmable Coin Acceptor (HX-616) - 6 Coin","description":"\u003cp\u003eThis \u003cstrong\u003eHX-616\u003c\/strong\u003e programmable coin acceptor can be programmed to accept up to 6 different types of coin, either for your own coin tokens or real moolah!\u003c\/p\u003e\n\u003cp\u003eThe acceptor is compatible with coins with a 15mm-29mm diameter and 1.8mm-3mm thickness - be sure to measure your coins to ensure they'll fit!\u003c\/p\u003e\n\u003cp\u003eYou'll need to program the coins you want it to accept. Coins are assigned a number of pulses, then when a coin is inserted, the output will pulse and the unit will consider diameter, thickness, speed etc to determine if it's a valid coin or whether someone's trying to pull a fast one!\u003c\/p\u003e\n\u003cp\u003eThe acceptor comes complete with mounting hardware and a cable for power\/signal. An instruction sheet is also included. You'll need a bag of each coin type to 'train' the acceptor (~20).\u003cbr\u003e\u003cbr\u003eOnce set up, you can connect a 10K resistor from the white wire to your Arduino's VCC line (5V), then insert coins to validate that the coin line pulses high for about 40 milliseconds the right number of times.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eAdafruit has a great tutorial on using these kinds of devices to make an Electronic Piggy bank!\u003c\/p\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRecognition Rate: 95%\u003c\/li\u003e\n\u003cli\u003eRecognition Speed: 0.6 second\u003c\/li\u003e\n\u003cli\u003ePower requirements: 12VDC (+- 20%)\u003c\/li\u003e\n\u003cli\u003eWorking current: ~50mA\u003c\/li\u003e\n\u003cli\u003ePeak current: ~350mA\u003c\/li\u003e\n\u003cli\u003eAccepts coins from 15mm to 29mm in diameter and 1.8mm to 3mm thick\u003c\/li\u003e\n\u003cli\u003eProgrammable for up to six different coins\u003c\/li\u003e\n\u003cli\u003eDoes not work with coins that have 'holes' in the centre! Also may not work with NZ $1 coins.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006270181531,"sku":"DGHLC 8307000721","price":19.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/programmable-coin-acceptor-hx-616-6-coin-the-pi-hut-103761-30077691429059_341ea229-33be-4c92-a61f-101e5cfa742c.jpg?v=1793492331"},{"product_id":"60cm-1090mhz-antenna-for-ads-b","title":"60cm 1090MHz Antenna For ADS-B","description":"\u003cp\u003eOur great-value 60cm 1090 MHz 5.5dBi antenna is perfect for increasing the range of your ADS-B flight tracker. It's the natural progression for enthusiasts, moving on from our \u003c\/p\u003e\u003cp\u003einternal 3dBi magnetic base antenna\u003c\/p\u003e.\n\u003cp\u003eThe antenna can be mounted internally against a window or in a loft, or externally (our recommendation) on any pole or mast that's 2\/5cm to 4cm in diameter, using the included U-bolts and fixings in conjunction with the antenna's bracket.\u003c\/p\u003e\n\u003cp\u003eThe antenna uses an N-Female connection which is compatible with all ADS-B receivers including \u003cspan\u003eFlightFeeder, PiAware, Mode S Beast, Radarcape, Kinetic SBS1\/SBS3, RTL Dongles, and more.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDon't forget to pick up an \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eSMA to N-Type antenna cable\u003c\/p\u003e for hooking this up to your \u003cp\u003eFlightAware receiver\u003c\/p\u003e!\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1090MHz ADS-B Antenna\u003c\/li\u003e\n\u003cli\u003eGain: 5.5dBi Avg\u003c\/li\u003e\n\u003cli\u003eRadiation: Omni\u003c\/li\u003e\n\u003cli\u003eU-bolts and fixings included\u003c\/li\u003e\n\u003cli\u003eConnector: N-Female\u003c\/li\u003e\n\u003cli\u003eSuitable for Mode S and ADS-B data from Aircraft\u003c\/li\u003e\n\u003cli\u003eFinish: Grey\u003c\/li\u003e\n\u003cli\u003eApproximately 60cm long\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006270247067,"sku":"DGHLC 7023575662787","price":14.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/60cm-1090mhz-antenna-for-ads-b-the-pi-hut-104726-30376184283331_cc33ff58-d1bf-4316-bac8-51db284d6e21.jpg?v=1793492340"},{"product_id":"small-arcade-joystick","title":"Small Arcade Joystick","description":"\u003cp\u003eThis snappy 8-way joystick beckons you to play with it! It is rugged, and not too large, reminiscent of a Pac Man arcade cabinet. Unlike the potentiometer-based 2-axis and mini thumbsticks, this joystick uses 4 snap microswitches so it's good if you want a directional control but not the best choice if you want proportional output (that is, its either on\/off not sensitive to small movement changes).\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e \u003cp\u003eThe ball-top is threaded with Sanwa-compatible threads so you can replace the top with any 'Sanwa-style' tops for customizability!\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n \u003cdiv\u003e\u003cdiv\u003e\u003c\/div\u003e\u003c\/div\u003e \u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006270410907,"sku":"DGHLC 8306979473","price":8.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/small-arcade-joystick-the-pi-hut-ada480-28610306343107_b44b7ec3-2d64-400e-ad73-d39be3459fec.jpg?v=1793492346"},{"product_id":"smt-0603-resistor-and-capacitor-book-3725-pieces","title":"SMT 0603 Resistor And Capacitor Book - 3725 Pieces","description":"\u003cp\u003eAlways have the right SMT components at your hand with this awesome 0603 Resistor and Capacitor book set! This book has nice translucent pages filled with cut tape \u003cstrong\u003e0603 SMT components\u003c\/strong\u003e, sorted, labeled and ready to go. This book has \u003cstrong\u003e63 5% resistor values, 3025 parts\u003c\/strong\u003e and \u003cstrong\u003e17 capacitor values, 700 parts\u003c\/strong\u003e. The nice thing is that you get a good distribution of the resistors, with more 1K and 10KΩ and fewer of the really high values.\u003cbr\u003e\u003cbr\u003e63 5% Yageo resistor values:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 pieces each of the following:\u003c\/strong\u003e 0Ω, 1KΩ, 10KΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 pieces each of the following:\u003c\/strong\u003e 1Ω, 1.2Ω, 1.5Ω, 2Ω, 2.7Ω, 3.3Ω, 4.3Ω, 5.1Ω, 6.8Ω, 8.2Ω, 10Ω, 12Ω, 15Ω, 20Ω, 27Ω, 33Ω, 43Ω, 51Ω, 68Ω, 82Ω, 100Ω, 120Ω, 150Ω, 200Ω, 270Ω, 330Ω, 430Ω, 510Ω, 680Ω, 820Ω, 1.2KΩ, 1.5KΩ, 2KΩ, 2.7KΩ, 3.3KΩ, 4.3KΩ, 5.1KΩ, 6.8KΩ, 8.2KΩ, 12KΩ, 15KΩ, 29KΩ, 27KΩ, 33KΩ, 43KΩ, 51KΩ, 68KΩ, 82KΩ, 100KΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 pieces each of the following:\u003c\/strong\u003e 120KΩ, 150KΩ, 200KΩ, 270KΩ, 330KΩ, 430KΩ, 510KΩ, 680KΩ, 820KΩ, 1MΩ, 2MΩ\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e17 Murata capacitor values:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 pieces each of the following:\u003c\/strong\u003e 22pF ±5% 50V C0G, 0.1uF ±10% 25V X7R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 pieces each of the following:\u003c\/strong\u003e 27pF ±5% 50V C0G, 33pF ±5% 50V C0G, 100pF ±5% 50V C0G, 0.47uF ±10% X7R, 1.0uF ±10% X7R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 pieces each of the following:\u003c\/strong\u003e 15pF ±5% 50V C0G, 47pF ±5% 50V C0G, 68pF ±5% 50V C0G, 82pF ±5% 50V C0G, 120pF ±5% 50V C0G, 150pF ±5% 50V C0G, 180pF ±5% 50V C0G, 220pF ±5% 50V C0G, 1nF ±10% 50V X7R,10nF ±10% 50V X7R\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 7.5\" x 5.5\" x 1.25\" (19cm x 14cm x 3.5cm)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 375 grams (13 oz)\u003cbr\u003e\u003cbr\u003e63 5% Yageo resistor values:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 pieces each of the following:\u003c\/strong\u003e 0Ω, 1KΩ, 10KΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 pieces each of the following:\u003c\/strong\u003e 1Ω, 1.2Ω, 1.5Ω, 2Ω, 2.7Ω, 3.3Ω, 4.3Ω, 5.1Ω, 6.8Ω, 8.2Ω, 10Ω, 12Ω, 15Ω, 20Ω, 27Ω, 33Ω, 43Ω, 51Ω, 68Ω, 82Ω, 100Ω, 120Ω, 150Ω, 200Ω, 270Ω, 330Ω, 430Ω, 510Ω, 680Ω, 820Ω, 1.2KΩ, 1.5KΩ, 2KΩ, 2.7KΩ, 3.3KΩ, 4.3KΩ, 5.1KΩ, 6.8KΩ, 8.2KΩ, 12KΩ, 15KΩ, 29KΩ, 27KΩ, 33KΩ, 43KΩ, 51KΩ, 68KΩ, 82KΩ, 100KΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 pieces each of the following:\u003c\/strong\u003e 120KΩ, 150KΩ, 200KΩ, 270KΩ, 330KΩ, 430KΩ, 510KΩ, 680KΩ, 820KΩ, 1MΩ, 2MΩ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e17 Murata capacitor values:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100 pieces each of the following:\u003c\/strong\u003e 22pF ±5% 50V C0G, 0.1uF ±10% 25V X7R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 pieces each of the following:\u003c\/strong\u003e 27pF ±5% 50V C0G, 33pF ±5% 50V C0G, 100pF ±5% 50V C0G, 0.47uF ±10% X7R, 1.0uF ±10% X7R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e25 pieces each of the following:\u003c\/strong\u003e 15pF ±5% 50V C0G, 47pF ±5% 50V C0G, 68pF ±5% 50V C0G, 82pF ±5% 50V C0G, 120pF ±5% 50V C0G, 150pF ±5% 50V C0G, 180pF ±5% 50V C0G, 220pF ±5% 50V C0G, 1nF ±10% 50V X7R,10nF ±10% 50V X7R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e \u003c\/div\u003e\n \u003cdiv\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e \u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006270673051,"sku":"DGHLC 8306975633","price":23.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/smt-0603-resistor-and-capacitor-book-3725-pieces-the-pi-hut-ada442-28610744942787_dfd985f1-d6ee-42d8-b304-7ee85a2cdaf2.jpg?v=1793492353"},{"product_id":"ttl-laser-diode-5mw-650nm-red-50khz-max","title":"TTL Laser Diode - 5mW 650nm Red - 50KHz Max","description":"\u003cp\u003eYou have some frickin' sharks at your lair, and you're thinking \"it would be really great if I could attach some lasers to them\" and then you see these little laser diode modules: what great timing! These encapsulated laser diodes are Class IIIa 5mW, with a 650nm red wavelength. They can be driven from 4.8V to 5.2V so they're great for your embedded electronics project.\u003cbr\u003e\n\n\u003cbr\u003e\n\nThis module in particular is designed to be modulated\/pulsed via the yellow wire. So you can use these for laser light shows, laser harps, 'wireless' communications and data transmission, electronic 'trip wires', laser-vision guidance, and more! Simply connect 5V power to the red and black wires, and pull the yellow wire to 5V or ground to turn on and off, respectively. You will be lasing in no time.\u003cbr\u003e\n\n\u003cbr\u003e\n\n\u003cb\u003ePlease note:\u003c\/b\u003e this is not a laser pointer. It's a diode with integrated driver. You still need a 5VDC power supply. These diodes are 5mW output, and have a safety label marked on them. \u003c\/p\u003e\u003cp\u003eFor more information on laser safety and ratings check out the Wikipedia page\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv\u003e \u003cdiv\u003e \u003cdiv\u003e\u003cul\u003e \u003cli\u003eWeight: 11.85g\u003c\/li\u003e \u003cli\u003eDiameter: 10.11mm\u003c\/li\u003e \u003cli\u003eLength: 32.82mm\u003c\/li\u003e \u003cli\u003eWire length: 100mm\u003c\/li\u003e \u003cli\u003e650nm wavelength\u003c\/li\u003e \u003cli\u003e4.8 - 5.2V DC voltage input\u003c\/li\u003e \u003cli\u003e35mA max current draw\u003c\/li\u003e \u003cli\u003eMax TTL frequency: 50KHz\u003c\/li\u003e \u003cli\u003eOperating temperature -10°C to 40°C;\u003c\/li\u003e \u003c\/ul\u003e\u003c\/div\u003e \u003c\/div\u003e\n \u003cdiv\u003e\u003cdiv\u003e\u003c\/div\u003e\u003c\/div\u003e \u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006272049307,"sku":"DGHLC 8306603217","price":11.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/ttl-laser-diode-5mw-650nm-red-50khz-max-the-pi-hut-ada1056-28610358902979_bcc9cda3-72ba-4cde-b975-749e8bdc3f1a.jpg?v=1793492358"},{"product_id":"chromatek-19mm-rugged-latching-metal-pushbutton-with-neopixel-19-b-l-f1","title":"ChromaTek 19mm Rugged Latching Metal Pushbutton With NeoPixel (19-B-L-F1)","description":"\u003cp\u003eBy popular demand, we now have rugged metal buttons with a full-color \u003cstrong\u003eNeoPixel \u003c\/strong\u003eLED ring light! These chrome-plated metal buttons are rugged, but certainly not lacking in flair.\u003c\/p\u003e \u003cp\u003eThis is a \u003cstrong\u003e19mm Latching\u003c\/strong\u003e version of the RGB pushbutton. Simply drill a 19mm hole into any material up to 0.45\" thick and you can fit these in place – there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a plastic RGB LED ring.\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eTo use the NeoPixel Color LED:\u003c\/strong\u003e Power the internal NeoPixels with +5V, ground and a NeoPixel signal line - it's a lot easier than wiring up 3 separate RGB LED diodes. Best of all, the NeoPixel signal is chainable, so you can light up multiple switches in one panel.\u003c\/p\u003e \u003cp\u003eThis pushbutton has both normally-open and normally closed contacts, and unlike our other rugged metal pushbuttons, these come with a detachable 7-wire cable harness to make wiring easy. \u003c\/p\u003e\u003cp\u003eFollow the datasheet for the wiring pinout\u003c\/p\u003e. \u003cp\u003eThe switch and LED are electrically separated, so to change the color, use a microcontroller to both read the contact pins and control the NeoPixel.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e\u003cp\u003eWe also carry a Momentary version\u003c\/p\u003e. \u003ch2\u003eTechnical Details\u003c\/h2\u003e \u003cdiv\u003e \u003cul\u003e \u003cli\u003e\u003cp\u003eDatasheet\u003c\/p\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006320152731,"sku":"DGHLC 7015542816963","price":12.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/chromatek-19mm-rugged-latching-metal-pushbutton-with-neopixel-19-b-l-f1-the-pi-hut-ada5235-30300049572035_fc64f786-d00a-4170-b5f1-654111cbda30.jpg?v=1793492364"},{"product_id":"ecell-breadboard-plugin-components-pack","title":"ECell: Breadboard-Plugin Components Pack","description":"\u003cdiv\u003e\n\u003cdiv\u003eBreadboard-Plugin Components Pack is a new kit designed for breadboard experiment. It provides many kinds of components, such as resistors, capacitors, diodes, transistor .etc. The module pins are using gold-plating technology, solid and durable. It could be plugged on the breadboard directly. easy, reliable and reusable.\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eThis innovative approach will solve the following issues caused by using DIP type of components:\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eHard to read the value (Resistor color codes)\u003c\/li\u003e\n\u003cli\u003eSevere deformations of the pin after used, non-reusable, not environment-friendly\u003c\/li\u003e\n\u003cli\u003eThe pin diameter is too thin or too thick, poor match with the breadboard hole\u003c\/li\u003e\n\u003cli\u003eConfused the order of transistor “e”, “b”, “c” pins\u003c\/li\u003e\n\u003cli\u003eUsage problem: Most of sensors and actuators require 3 interfaces: Signal\/VCC\/GND, you have to use the jumper wire for the connection, messy and unreliable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch2\u003eFeatures\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to Recognize\u003c\/strong\u003e : Resistance value, capacitance values, positive\/negative polaron and pin functions are marked clearly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to Learn\u003c\/strong\u003e : The circuit symbol is clearly visible, directly match the circuit diagram\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to Use\u003c\/strong\u003e : Direct-plug pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to Plug\/unplug\u003c\/strong\u003e : The 0.64mm diametral pin matches the breadboard hole perfectly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Reliability\u003c\/strong\u003e : ENIG technology, the circuit connection is reliable and durable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironment-Friendly\u003c\/strong\u003e : Reusable and Environment-friendly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eSpecifications\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eResistor: 220R，1K，4.7K，10K\u003c\/li\u003e\n\u003cli\u003eCapacitor: 22pF@50V, 100nF(0.1uF)@50V, 47uF@10V\u003c\/li\u003e\n\u003cli\u003eLED: Red, Yellow, Blue, Green\u003c\/li\u003e\n\u003cli\u003eDiode: If=1A, Vfm=0.7V, Vr=40V\u003c\/li\u003e\n\u003cli\u003eTransistor-NPN: Vceo=45V, Ic=500mA, hFE=400\u003c\/li\u003e\n\u003cli\u003eTransistor-PNP: Vceo=-45V, Ic=-500mA, hFE=400\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eWiki Doc \u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e4x Resistor 220R \u003c\/li\u003e\n\u003cli\u003e4x Resistor 1K\u003c\/li\u003e\n\u003cli\u003e4x Resistor 4.7K\u003c\/li\u003e\n\u003cli\u003e4x Resistor 10K\u003c\/li\u003e\n\u003cli\u003e2x Capacitor 22pF\u003c\/li\u003e\n\u003cli\u003e2x Capacitor 100nF\u003c\/li\u003e\n\u003cli\u003e2x Capacitor 47uF\u003c\/li\u003e\n\u003cli\u003e2x LED--R\u003c\/li\u003e\n\u003cli\u003e2x LED--Y\u003c\/li\u003e\n\u003cli\u003e2x LED--B \u003c\/li\u003e\n\u003cli\u003e2x LED--G\u003c\/li\u003e\n\u003cli\u003e2x Diode\u003c\/li\u003e\n\u003cli\u003e2x NPN transistor\u003c\/li\u003e\n\u003cli\u003e2x PNP transistor\u003c\/li\u003e\n\u003cli\u003e2x Breadboard PluginConnector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006324379803,"sku":"DGHLC 8307117969","price":11.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/ecell-breadboard-plugin-components-pack-dfrobot-kit0098-28601620267203_107163b3-b9f5-40f3-a715-5d45666254be.jpg?v=1793492374"},{"product_id":"coin-acceptor-programmable-4-coin-type-jy-924","title":"Coin Acceptor - Programmable 4 Coin Type (JY-924)","description":"\u003cp\u003eYour project may be free-as-in-speech, but that doesn't mean it has to be free-as-in-beer. This handy coin validator\/acceptor module is just like the ones you've seen in arcades. \u003cstrong\u003eThis model has the cool ability to accept up to 4 different coins\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003eFor example, you can program it for 4 different US coins, or European, or Japanese OR you can have it accept 4 coins from different countries - say a Chinese Yuan, Japanese Yen, American Quarter and European Euro. First you'll have to program it with what coins you want it to accept. Any coin from 15mm to 29mm in diameter can be used. Each coin is assigned a number of pulses, so for example, a nickel should be 1 pulse, a dime, 2 pulses, a quarter 5 pulses and a half dollar 10 pulses. When a valid coin is inserted, the output line will pulse for 20-60ms (configurable). The acceptor looks for diameter, thickness, dropping speed, etc to determine if a coin is valid.\u003c\/p\u003e\n\u003cp\u003eComes with the acceptor itself, mounting hardware, and a cable for power\/signal. The coin falls through, you choose how and where to store them.\u003c\/p\u003e\n\u003cp\u003eTo program the validator, go through the \u003c\/p\u003e\u003cp\u003einstruction sheet\u003c\/p\u003e - you'll need about 20 of each coin to help program the acceptor. After programming, connect a 10K (1K to 100K is fine) pullup resistor from the white wire to your microcontroller's VCC line (for Arduino, this is a +5V). Insert different coins, and verify that the coin line pulses high for about 40 milliseconds the right number of times.\n\u003cp\u003e\u003c\/p\u003e\u003cp title=\"Programmable Coin Acceptor (HX-616) - 6 Coin\"\u003eWe also stock a 6-coin acceptor\u003c\/p\u003e.\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eModel number: JY-924\u003c\/li\u003e\n\u003cli\u003ePower requirements: 12VDC (+- 20%)\u003c\/li\u003e\n\u003cli\u003eQuiescent current: ~25mA\u003c\/li\u003e\n\u003cli\u003ePeak current (for solenoid): 400mA\u003c\/li\u003e\n\u003cli\u003eAccepts coins from 15mm to 29mm in diameter, 1.2mm to 3.8mm thick\u003c\/li\u003e\n\u003cli\u003eProgrammable for up to four different coins\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not work with coins that have 'holes' in the center!\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAlso may not work with NZ $1 coins (one report)\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eInstruction sheet\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006324936859,"sku":"DGHLC 7694481359043","price":11.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/coin-acceptor-programmable-4-coin-type-jy-924-adafruit-ada787-41329589977283_484b1114-2ea1-4403-9175-601472e6231c.jpg?v=1793492378"},{"product_id":"sparkfun-beginner-parts-kit","title":"SparkFun Beginner Parts Kit","description":"\u003cp\u003eThe SparkFun Beginner Parts Kit is a small container of parts frequently used by beginning (or even experienced) hobbyists that gives you all of the basic through-hole components you will need to get started playing with embedded projects. These are the \"bubble gum\" parts that we regularly use or have often seen requested in classes. Inside this kit, you will find a good starter assortment of caps, ICs, regulators, diodes and good-for-blinky LEDs. This kit also features an adjustable parts box for better organization.\u003c\/p\u003e\n\u003cp\u003eThis assortment of parts makes a great gift for beginner and advanced electronics nerds! Whether you're starting an electronics collection, or just refilling, the Beginner Parts Kit will have a lot of what you need.\u003c\/p\u003e\n\u003cp\u003eYou may notice there are no resistors in this kit. We recommend purchasing a \u003c\/p\u003e\u003cp\u003eresistor kit\u003c\/p\u003e for all the resistor values you may need.\n\u003cp\u003e\u003c\/p\u003e\u003cp\u003eGet Started with the Beginner Parts Kit Guide\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Adjustable Parts Box\u003c\/li\u003e\n\u003cli\u003e10x 0.1uF Cap\u003c\/li\u003e\n\u003cli\u003e5x 100uF Cap\u003c\/li\u003e\n\u003cli\u003e5x 10uF Cap\u003c\/li\u003e\n\u003cli\u003e5x 1uF Cap\u003c\/li\u003e\n\u003cli\u003e5x 10nF Cap\u003c\/li\u003e\n\u003cli\u003e5x 1nF Cap\u003c\/li\u003e\n\u003cli\u003e5x 100pF Cap\u003c\/li\u003e\n\u003cli\u003e5x 10pF Cap\u003c\/li\u003e\n\u003cli\u003e5x 1N4148 Diode\u003c\/li\u003e\n\u003cli\u003e5x 1N4001 Diode\u003c\/li\u003e\n\u003cli\u003e5x 2N3906 PNP Transistor\u003c\/li\u003e\n\u003cli\u003e5x 2N3904 NPN Transistor\u003c\/li\u003e\n\u003cli\u003e3x 20-pin Female Header\u003c\/li\u003e\n\u003cli\u003e3x 20-pin Male Header\u003c\/li\u003e\n\u003cli\u003e3x Mini Power Switch\u003c\/li\u003e\n\u003cli\u003e2x Push Buttons\u003c\/li\u003e\n\u003cli\u003e1x 10K Trimpot\u003c\/li\u003e\n\u003cli\u003e2x AS358P OpAmp\u003c\/li\u003e\n\u003cli\u003e2x 3.3V Regulator\u003c\/li\u003e\n\u003cli\u003e2x 5V Regulator\u003c\/li\u003e\n\u003cli\u003e1x 555 Timer\u003c\/li\u003e\n\u003cli\u003e1x Green LED\u003c\/li\u003e\n\u003cli\u003e1x Yellow LED\u003c\/li\u003e\n\u003cli\u003e1x Red LED\u003c\/li\u003e\n\u003cli\u003e1x 7-Segment Red LED\u003c\/li\u003e\n\u003cli\u003e1x Mini Photocell\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eQuick Start Guide\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006325067931,"sku":"DGHLC 6614324183235","price":10.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/sparkfun-beginner-parts-kit-sparkfun-kit-13973-40963544416451_20b3ee0f-ee9e-43c8-84b5-917fc2de9988.jpg?v=1793492405"},{"product_id":"tactile-switch-assortment-25-different-buttons-with-10-pieces-of-each","title":"Tactile Switch Assortment - 25 Different Buttons With 10 Pieces Of Each","description":"\u003cp\u003eWhen designing your next PCB, if you're not sure what sort of tactile switches you can fit, or how they would look, this\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eTactile Switch Assortment with 25 Different Buttons (10 pcs each type) \u003c\/strong\u003eis incredibly handy! You get just enough that you can prototype and even lose a couple of pieces, but not so many that you're drowning in buttons.\u003c\/p\u003e\n\u003cp\u003eAlso great for repair, if you're not positive about what tactile switch is in the appliance or device you're using. \u003c\/p\u003e\n\u003cp\u003eEach switch is momentary-type, where the contacts on either side close when the button is pressed. Some have 4 legs since there are duplicate connections - that doesn't mean there are two separate switches. Use a multimeter on continuity mode if you're not sure of how the tact switch is set up.\u003c\/p\u003e\n\u003cp\u003eThese work best soldered into a PCB but many of the through-hole types can be used on a \u003c\/p\u003e\u003cp\u003esolderless breadboard\u003c\/p\u003e as shown in \u003cp\u003ethis tutorial\u003c\/p\u003e.\n\n\u003ch2\u003eIncludes\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e6mm x 6mm x 5mm\u003c\/li\u003e\n\u003cli\u003e6mm x 6mm x 4.3mm\u003c\/li\u003e\n\u003cli\u003e6mm x 6mm x 5mm\u003c\/li\u003e\n\u003cli\u003e12mm x 12mm x 10mm\u003c\/li\u003e\n\u003cli\u003e6mm x 6mm x 5mm\u003c\/li\u003e\n\u003cli\u003e2mm x 4mm x 3.5mm\u003c\/li\u003e\n\u003cli\u003e3mm x 6mm x 2.5mm\u003c\/li\u003e\n\u003cli\u003e3mm x 6mm x 5mm\u003c\/li\u003e\n\u003cli\u003e3mm x 6mm x 4.3mm\u003c\/li\u003e\n\u003cli\u003e3mm x 6mm x 5mm\u003c\/li\u003e\n\u003cli\u003e3mm x 6mm x 3.5mm\u003c\/li\u003e\n\u003cli\u003e3mm x 6mm x 2.5mm\u003c\/li\u003e\n\u003cli\u003e4.5mm x 4.5mm x 1.5mm\u003c\/li\u003e\n\u003cli\u003e4.5mm x 4.5mm x 3.8mm\u003c\/li\u003e\n\u003cli\u003e4.5mm x 4.5mm x 5mm\u003c\/li\u003e\n\u003cli\u003e4mm x 4mm x 1.5mm\u003c\/li\u003e\n\u003cli\u003e4mm x 4mm x 0.8mm\u003c\/li\u003e\n\u003cli\u003e6mm x 6mm x 3.1mm\u003c\/li\u003e\n\u003cli\u003e6mm x 6mm x 5mm\u003c\/li\u003e\n\u003cli\u003e6mm x 6mm x 5mm\u003c\/li\u003e\n\u003cli\u003e3mm x 4mm x 2mm\u003c\/li\u003e\n\u003cli\u003e3mm x 3.5mm x 1.9mm\u003c\/li\u003e\n\u003cli\u003e12mm x 12mm x 5mm\u003c\/li\u003e\n\u003cli\u003e12mm x 12mm x 7.3mm\u003c\/li\u003e\n\u003cli\u003e12mm x 12mm x 5mm\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eTactile Button Tutorial\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eDiagrams (zip file)\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003eProduct Files\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003e1. 6mm x 6mm x 5mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e2. 6mm x 6mm x 4.3mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e3. 6mm x 6mm x 5mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e4. 12mm x 12mm x 10mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e5. 6mm x 6mm x 5mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e6. 2mm x 4mm x 3.5mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e7. 3mm x 6mm x 2.5mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e8. 3mm x 6mm x 5mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e9. 3mm x 6mm x 4.3mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e10. 3mm x 6mm x 5mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e11. 3mm x 6mm x 3.5mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e12. 3mm x 6mm x 2.5mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e13. 4.5mm x 4.5mm x 1.5mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e14. 4.5mm x 4.5mm x 3.8mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e15. 4.5mm x 4.5mm x 5mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e16. 4mm x 4mm x 1.5mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e17. 4mm x 4mm x 0.8mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e18. 6mm x 6mm x 3.1mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e19. 6mm x 6mm x 5mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e20. 6mm x 6mm x 5mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e21. 3mm x 4mm x 2mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e22. 3mm x 3.5mm x 1.9mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e23. 12mm x 12mm x 5mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e24. 12mm x 12mm x 7.3mm\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003e25. 12mm x 12mm x 5mm\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006325493915,"sku":"DGHLC 7468559466691","price":11.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/tactile-switch-assortment-25-different-buttons-with-10-pieces-of-each-the-pi-hut-ada5493-39774217044163_0c029a09-782b-4edc-8e40-7331c887282a.jpg?v=1793492411"},{"product_id":"162mhz-ais-filtered-preamplifier","title":"162MHz AIS Filtered Preamplifier","description":"\u003cp\u003eThis is a cost-effective SAW-based filtered pre-amplifier which gives excellent performance gains \u003cspan\u003eand improved reception on 161MHz\/AIS frequencies.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNew USB-C version! \u003c\/b\u003e\u003cstrong\u003eThis pre-amp now comes with a USB-C connector and power LED!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a cost-effective SAW based unit which gives excellent performance gains.\u003cbr\u003e\u003cbr\u003eAll Uputronics preamps are compatible with most USB SDR Dongles such as the RTL USB, Airspy, Fun Cube. You can power them from either bias tee (this item is 100% compatible with the Airspy bias-tee) or a \u003c\/p\u003e\u003cp\u003eUSB-C cable\u003c\/p\u003e.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBias-tee voltage input is 5V\u003c\/strong\u003e.\n\u003cp\u003e\u003cstrong\u003eNote: Unlike previous models, component supply issues mean bias-tee input voltage is 5V max. \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis unit is a small filter and preamp designed to go between a software-defined radio receiver and an antenna. Using a SAW bandpass filter and a low noise amplifier (LNA), it stops out of band intermodulation while providing additional gain for increased sensitivity. The LNA is before the SAW filter. This particular model is tuned for use with 159-163MHz. To block strong commercial FM signals a high pass filter is installed before the LNA.\u003cbr\u003e\u003cbr\u003eThe LNA used is a MiniCircuits PSA4-5043+ which provides at least 20dB of gain @ 161MHz. To stop out of band intermodulation a 161MHz SAW bandpass filter, which has a 7.6MHz bandwidth, is also present. The insertion loss of this filter is approximately 1.4dB. \u003cbr\u003e\u003cbr\u003eHigh-quality SMA female connectors are fitted for antenna input and radio output, a RED power indicator is provided.\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDatasheet\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMechanical Diagram\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006332080283,"sku":"DGHLC 4608284033086","price":25.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/162mhz-ais-filtered-preamplifier-uputronics-102618-39795145081027_be905588-c4c6-4095-80e4-cc37261df461.jpg?v=1793492417"},{"product_id":"flightaware-978-1090-mhz-ads-b-bandpass-sma-filter","title":"FlightAware 978-1090 MHz ADS-B Bandpass SMA Filter","description":"\u003cp\u003eSMA (female to male) 1090MHz Mode S filter. Designed to reduce interference and significantly improve valid mesage rate of ADS-B\/Mode S receivers. Passes range 980MHz - 1150MHz. Impedance is 50ohms and insertion loss is \u0026lt;2.5dB.\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003e1090MHZ ADS-B \/ Mode S Filter\u003c\/li\u003e\n\t\u003cli\u003eSMA Female to SMA Male\u003c\/li\u003e\n\t\u003cli\u003ePasses range 980MHz - 1150MHz\u003c\/li\u003e\n\t\u003cli\u003eReduces RF noise, increasing number of ADS-B\/Mode S messages\u003c\/li\u003e\n\t\u003cli\u003eIdeal for RTL-SDR USB Dongle receivers like PiAware\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006335914139,"sku":"DGHLC 2215671234622","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/flightaware-978-1090-mhz-ads-b-bandpass-sma-filter-flightaware-103076-7008552353854_5719f8d6-4bff-455e-b448-4a8d3809e7db.jpg?v=1793492420"},{"product_id":"adafruit-parts-pal","title":"Adafruit Parts Pal","description":"\u003cp\u003eLEDs and passives and transistors and switches and op-amps oh my! The \u003cstrong\u003eAdafruit Parts Pal\u003c\/strong\u003e is the ultimate companion for an entry-level maker learning electronics. This kit is your friend whenever you need to build up a project. It contains many of our most popular components and prototyping parts all wrapped up in one parts pack so you can open up and dig right in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKit Contents:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePrototyping:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x - Storage box with latch\u003c\/li\u003e\n\u003cli\u003e1x - \u003cp\u003eHalf-size breadboard\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e20x - \u003cp\u003eMale\/male jumper wires - 3\" (75mm)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e10x - \u003cp\u003eMale\/male jumper wires - 6\" (150mm)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLEDs:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e5x - \u003cp\u003e5mm Diffused green LEDs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e5x - \u003cp\u003e5mm Diffused red LEDs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x - \u003cp\u003e10mm Diffused Common-Anode RGB LED\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCapacitors:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e10x - 1.0uF Ceramic capacitors\u003c\/li\u003e\n\u003cli\u003e10x - \u003cp\u003e0.1uF Ceramic capacitors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e10x - 0.01uF Ceramic capacitors\u003c\/li\u003e\n\u003cli\u003e5x - \u003cp\u003e10uF 50V Electrolytic capacitors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e5x - \u003cp\u003e100uF 16V Electrolytic capacitors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eResistors:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e10x - 560 ohm 5% axial resistors\u003c\/li\u003e\n\u003cli\u003e10x - 1K ohm 5% axial resistors\u003c\/li\u003e\n\u003cli\u003e10x - 10K ohm 5% axial resistors\u003c\/li\u003e\n\u003cli\u003e10x - 47K ohm 5% axial resistors\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSemiconductors:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e5x - \u003cp\u003e1N4001 Diodes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e5x - \u003cp\u003e1N4148 Signal Diodes\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e5x - \u003cp\u003eNPN Transistor PN2222 TO-92\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e5x - PNP Transistor PN2907 TO-92\u003c\/li\u003e\n\u003cli\u003e2x - \u003cp\u003e5V 1.5A Linear voltage regulator - 7805 TO-220\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x - \u003cp\u003e3.3V 800mA Linear voltage regulator - LD1117-3.3 TO-220\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x - TLC555 wide-voltage range, low-power 555 Timer\u003c\/li\u003e\n\u003cli\u003e1x - \u003cp\u003eLM358 Dual operational Amplifier\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSensors:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x - \u003cp\u003ePhotocell\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x - \u003cp\u003eThermistor (Breadboard version)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x - \u003cp\u003eVibration sensor switch\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x - \u003cp\u003e10K Breadboard trim potentiometer\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x - 1K Breadboard trim potentiometer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMechanical:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x - \u003cp\u003ePiezo buzzer\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e5x - \u003cp\u003e6mm Tactile switches\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e3x - \u003cp\u003eSPDT slide switches\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x - \u003cp\u003e40-pin Break-away male header strip\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x - \u003cp\u003e40-pin female header strip\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv\u003e \u003cp\u003e\u003cstrong\u003eRevision history\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003cli\u003eAs of July 20, 2016 we now include an LM358 dual opamp!\u003c\/li\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDatasheets:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eTLC555\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLM358\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003ePN2222A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eMPS2907A\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eLD1117\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eL7805CV\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eEletrolytic Capacitor\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003cli\u003eThermistor\u003cul\u003e\n\u003cli\u003eResistance at 25 degrees C: 10K +- 1%\u003c\/li\u003e\n\u003cli\u003eB25\/50 = 3950+- 1%\u003c\/li\u003e\n\u003cli\u003eThermal time constant \u0026lt;= 15 seconds\u003c\/li\u003e\n\u003cli\u003eThermistor temperature range -55 °C to 125 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\n \u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006345613467,"sku":"DGHLC 8306942993","price":11.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/adafruit-parts-pal-adafruit-ada2975-28610421489859_6329ca89-6518-44e4-874b-5e9785b0184c.jpg?v=1793492425"},{"product_id":"great-scott-gadgets-ant700-300mhz-to-1100mhz-telescope-antenna","title":"Great Scott Gadgets ANT700 - 300MHz To 1100MHz Telescope Antenna","description":"\u003cp\u003e\u003cstrong\u003eANT700\u003c\/strong\u003e from Great Scott Gadgets is a lightweight telescopic antenna designed for operation from 300 MHz to 1100 MHz. Its total length is configurable from 9.5 cm to 24.5 cm. ANT700 is constructed of stainless steel and features an SMA male connector, rotating shaft, and adjustable elbow.\u003c\/p\u003e\u003cp\u003eANT700 is a 50 ohm general purpose antenna. It is the perfect first antenna for use with \u003c\/p\u003e\u003cp\u003eHackRF One\u003c\/p\u003e or \u003cp\u003eYARD Stick One\u003c\/p\u003e.\u003cp\u003e\u003cstrong\u003eNote: YARD Stick One not included.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv\u003e \u003cp\u003eAntenna length range: 2.5\"–8.5\"\u003c\/p\u003e\n\u003cp\u003eWeight: 13.5g\u003c\/p\u003e\n \u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006347514011,"sku":"DGHLC 10083009745","price":16.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/great-scott-gadgets-ant700-300mhz-to-1100mhz-telescope-antenna-great-scott-gadgets-ada3585-28610579136707_5ca10d12-83e9-478e-bb84-503b34b7a47c.jpg?v=1793492433"},{"product_id":"infrared-proximity-contactless-button","title":"Infrared Proximity Contactless Button","description":"\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThis IR proximity contactless button makes for a good replacement for typical push buttons in situations where touching the button isn't required or desirable (especially in this day and age!).\u003c\/p\u003e\n\u003cp\u003eThis button includes a built-in microcontroller to handle interference or noise, a red\/blue status LED that gives the user visual feedback that a \"touch\" has been registered, and two potentiometers on the back of the device that allow you to adjust the read range from 3-15cm and adjust the \"open time\" from 0.5 to 20 seconds.\u003c\/p\u003e\n\u003cp\u003eAll this is encased in a Fire\/IR resistant package that easily mounts through most panels and surfaces.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in micro controller for decoding infrared signal to avoid interference from the noise.\u003c\/li\u003e\n\u003cli\u003eBi-color status LED (Power on: Red\/ Proximity: Blue).\u003c\/li\u003e\n\u003cli\u003eAdjustable proximity range: 3~15cm (Default: 15 cm)\u003c\/li\u003e\n\u003cli\u003eSupport adjustable opening time 0.5~20 Sec. (Default: 0.5 Sec.) or latched ON or OFF output.\u003c\/li\u003e\n\u003cli\u003ePolycarbonate fire \u0026amp; UV proof material enclosure.\u003c\/li\u003e\n\u003cli\u003e39.7mm Diameter (full dimensions in datasheet below)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cp\u003eDatasheet\u003c\/p\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006347972763,"sku":"DGHLC 7015595212995","price":15.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/infrared-proximity-contactless-button-sparkfun-prt-18582-40990453825731_03edbce2-b5c3-4c23-a484-ccbd6187cbda.jpg?v=1793492439"},{"product_id":"chromatek-rugged-metal-pushbutton-19mm-5v-neopixel-momentary-19-b-m-f1","title":"ChromaTek Rugged Metal Pushbutton - 19mm 5V NeoPixel Momentary (19-B-M-F1)","description":"\u003cp\u003eBy popular demand, we now have rugged metal buttons with a full-color \u003cstrong\u003eNeoPixel \u003c\/strong\u003eLED ring light! These chrome-plated metal buttons are rugged, but certainly not lacking in flair.\u003c\/p\u003e\u003cp\u003eThis is a \u003cstrong\u003e19mm Momentary\u003c\/strong\u003e version of the RGB pushbutton. Simply drill a 19mm hole into any material up to 0.45\" thick and you can fit these in place – there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a plastic RGB LED ring.\u003cem\u003e \u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTo use the NeoPixel Color LED:\u003c\/strong\u003e Power the internal NeoPixels with +5V, ground and a NeoPixel signal line - it's a lot easier than wiring up 3 separate RGB LED diodes. Best of all, the NeoPixel signal is chainable, so you can light up multiple switches in one panel.\u003c\/p\u003e\u003cp\u003eThis pushbutton has both normally-open and normally-closed contacts, and unlike our other rugged metal pushbuttons, these come with a detchable 7-wire cable harness to make wiring easy. Follow the datasheet for the wiring pinout.\u003c\/p\u003e\u003cp\u003eThe switch and LED are electrically separated, so to change the color, use a microcontroller to both read the contact pins and control the NeoPixel.\u003c\/p\u003e\u003ch2\u003eTechnical Details\u003c\/h2\u003e\u003cdiv\u003e \u003cul\u003e \u003cli\u003eFollow the datasheet for the wiring pinout \u003c\/li\u003e\n\u003c\/ul\u003e \u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006350430363,"sku":"DGHLC 7003683225795","price":12.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/chromatek-rugged-metal-pushbutton-19mm-5v-neopixel-momentary-19-b-m-f1-the-pi-hut-ada5236-30156357304515_c838d4fc-495e-4964-9864-5e7beef3ec10.jpg?v=1793492445"},{"product_id":"flightaware-1090-mhz-ads-b-bandpass-sma-filter","title":"FlightAware 1090 MHz ADS-B Bandpass SMA Filter","description":"\u003cp\u003eSMA (female to male) 1090MHz Mode S filter. Designed to reduce interference and significantly improve valid mesage rate of ADS-B\/Mode S receivers. \u003c\/p\u003e\u003cp\u003e\u003cu\u003e\u003cb\u003eThis is the new \u003c\/b\u003e\u003c\/u\u003e\u003cu\u003e\u003cb\u003e2019 version which features a narrower pass band frequency range  of 1080MHz - 1100MHz\u003c\/b\u003e\u003c\/u\u003e.\u003c\/p\u003e\u003cp\u003eImpedance is 50ohms and insertion loss is \u0026lt;2.5dB.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1090MHZ ADS-B \/ Mode S Filter\u003c\/li\u003e\n\u003cli\u003eSMA Female to SMA Male\u003c\/li\u003e\n\u003cli\u003ePass Band Frequency Range: 1080 - 1100MHz\u003c\/li\u003e\n\u003cli\u003eManufacturer PN: PCT-BPF-1080-1100\u003c\/li\u003e\n\u003cli\u003ePass Band Insertion Loss: \u0026lt;2.5 dB\u003c\/li\u003e\n\u003cli\u003eStop Band Rejection: \u0026gt;30 dB\u003c\/li\u003e\n\u003cli\u003eNominal Impedance: 50 Ohm\u003c\/li\u003e\n\u003cli\u003eApproximate dimensions: 1.5 inches x 2.25 inches\u003c\/li\u003e\n\u003cli\u003eReduces RF noise, increasing number of ADS-B\/Mode S messages\u003c\/li\u003e\n\u003cli\u003eIdeal for RTL-SDR USB Dongle receivers like PiAware\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"My Store","offers":[{"title":"Default Title","offer_id":50006423961755,"sku":"DGHLC 2215671169086","price":14.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/4951\/4395\/files\/flightaware-1090-mhz-ads-b-bandpass-sma-filter-flightaware-103077-7008551764030_9529353c-89bb-42b7-9dfa-cd093c9157a7.jpg?v=1793492414"}],"url":"https:\/\/thepihutshops.com\/collections\/components.oembed","provider":"The Pi Hut","version":"1.0","type":"link"}